I need the service manual of TV LOEWE CONCEPT L32. The image is running horizontally, how do adjust or reset of system software?

you've to enter its service mode to do this. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

It sounds that the back-light ivnerter has the fault. Contact any service technician before confirmation.

What is the model number?

I would use a free translation program from the internet to translate words so you can locate in the menu the setting to change

Good day!!!

Good day!!!!


That problem is usually cause of faulty capacitors on the power supply board..

Just follow this instruction to fix your TV..

1. Open the back cover of your TV.
2. Look at the power supply board..Its normally connected to the power cord..
3. After that,,try to look at the actual image of capacitors if it is bulged on the top so that you can easily determine the bad capacitors..
4. After that,,try to replaced the bad capacitors using soldering iron and soldering lead..replaced the capacitors only with the same type ratings and value..
5. Some of the capacitors not bulged so its better if have a capacitance meter

Check ur DVD player and read ur instructional manual find out if ur DVD player have a HDMI port hub?Tries websites like Amazon.com,Ebay.com to buy a HDMI cable.That the esiest way to hookup a DVD player to a LCD or a Plama tvs.Just one HDMI cable to the DVD player HDMI hub and the other side of the HDMI cable to the tv HDMI hub.

your power supply is defective try to check the regulator.

The converter box has multiple ways to connect,but its really meant to convert a digital signal to analog. That's why the output channel for the converter is usually either channel 2 3 or 4 and you change the channel on the box rather than the tv. The box can be hooked up to the tuner which is the metal connector for antennas or cable. You can also use the composite hook ups as well (red and white audio, yellow video ) Just check which input on the tv your plugging them into so you know which to select for viewing. Signal out of the converter box,to video (av) in on the tv and you're good to go.

All Loewe connectors are underneath set. Look from the bottom.

Hi Rabia,

It seems as if the Picture-in-Picture feature of your television is activated. Please take a look at the remote control and find the PIP button and press it, this should bring the picture into full-screen and allow you to hear the audio.

-SHG