Instructions: Before performing a factory reset or clean boot the mobile
handheld device, please back up all your important files/data from the mobile.
Factory reset or clean boot may remove the personal files and folders from the
device. Download the files,
75XXw60HenCB0100.zip and 75XXw60HenCBA0100.zip on the PC using the below
mentioned web link. https://docs.symbol.com/KanisaPlatform/Publishing/666/12319_f.html Save the files on any location on the PC. Better to save on
the desktop screen for easy navigation. Right click on the saved zip files and extract the zip files
to a known location on the PC. Copy and paste the extracted files to either the root of an
SD Card (and place the SD Card in your device) OR the TEMP folder of the Motorola
MC75 mobile handheld device. Note: When the
zip files are extracted, we will get 4 or 5 files. One of the file is StartUpdLdr.exe
75XXCLEANBOOT.ZIP This file is intended for use when a CLEAN BOOT of an MC75XX
WM 6.0 device is required. Unzip the contents
of this device to either the root of an SD Card (and place the SD Card in your
device) OR the TEMP folder. Then follow
the UPDATE LOADER boot instructions below. 75XXCLEANBOOTANDBLANK.ZIP This file is intended for use when both a blank Application
Folder and a CLEAN BOOT of an MC75XX WM 6.0 device is required. Unzip the contents of this device to either
the root of an SD Card (and place the SD Card in your device) OR the TEMP
folder. Then follow the UPDATE LOADER
boot instructions below. Note:
Although the zip file references only Windows Mobile 6.0, however these
packages are approved for use on all version of Windows Mobile 6.x. Steps to
accomplish the factory reset of Motorola MC75 mobile handheld device There are two methods to perform an Update Loader Boot/
Clean boot on MC75: Method 1: Perform a cold boot: To perform a cold boot on the Motorola MC75 handheld device simultaneously
press the Power button and the 1 and 9 keys. Immediately, as soon as the device starts to boot (before
the splash screen is visible), hold the upper right hand trigger key. The screen should display a message with the words
"Update Warning" at the top of the screen. Place the device on A/C power either by placing it in a
cradle or a CAM. The update will
automatically start after AC power is detected. The device will invoke an Update Loader boot, which will
cause the PKGS.LST file deposited on the device to be processed. Leave the
device on A/C power during the Update Loader process. Method 2: Navigate to the root of an SD Card OR the TEMP folder of the
Motorola MC75 mobile handheld device. Tap 'StartUpdLdr.exe' After 20 seconds or so, the device will perform an Update
Loader boot which will cause the PKGS.LST file deposited on the device to be
processed. Leave the device on A/C power during the Update Loader process When the device has completed the process it will return to
the Windows Mobile ""Tap the screen to set up your Windows
Mobile-based device" screen. At
this point, if you used an SD card, please remove it from the device. If you placed the files in the TEMP folder,
they will be automatically erased by the CLEAN BOOT process.
Resetting the MC75 There are two reset functions, warm boot and cold boot. A warm boot restarts the MC75 by closing all running programs. A cold boot also restarts the MC75, and also resets the clock. Data saved in flash memory or a memory card is not lost. If the MC75 is not functioning properly, perform a warm boot first. If the MC75 still does not respond, perform a cold boot. Performing a Warm Boot Hold down the Power button for approximately five seconds. As soon as the MC75 starts to boot release the Power button. Performing a Cold Boot If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response Thanks, Joe
To perform a cold boot simultaneously press the Power button and the 1 and 9 keys.
Iām happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
Can anyone explain how to update the PRL forthe device?
Software downloads are available to Motorola customers as part of their Enterprise Mobility Services agreement. Enterprise Mobility Services agreements provide technical telephone support, rights to download entitled software releases, including patches and updates, and supporting documentation. Patches and fixes are also available to those customers with a valid software warranty. :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
To request access to this software please complete the Request Download form. Please note you must first register and login to Support Central
http://support.symbol.com/support/mysupp...
×
24,081 views
Usually answered in minutes!
Factory reset
doesn't work-package not found error
×