Hoover AAA 160 washing machine

probly the door interlocks at fault

I have hoover vision hd 1400 aaa
In proble stain blaster
I oll redy clean thing and check water vest pipe
Nothing to blocking

Possible that the control panel is short and so is tripping the fuse. Remove the connection to the panel and check if there is short , also remove the motor and check and this can confirm the case.

Possible failure of the heating element. Please check the continuity of the coil and if possible the voltage to the coil , if there is voltage at the cycle then the element is open.
check this link: heating element.

can I have the instruction how to use for HOOVER vision HD 1400 AA+A. I lost the manual

I downloaded the manual from Hoover website. Error number 2 relates to the washing machine not filling up with enough water. Check the water supply and correct angle of the pipe.

PLEASE INSPECT DOOR BOOT (RUBBER DOOR GASKET) IF NOT CAN BE FILL VALVES NOT COMPLETELY TURNING ITSELF OFF ,,, IF ALL LOOKS GOOD REPL/ PRESSURE SWITCH

i have a hoover soft wave maxi 1600 7.5kg AAA it spins and empty's and sometimes it don't what could be the fault

High summerzaman,
the error mean an problem by the temperatur sensor of the water. It is possible an defect of the sensor or cable between the sensor and the microcontroller or the controller self.


with regard Andreas

Have you tried turning off the circuit breaker that supplies power to the machine?
If you try that let the machine sit for a few minutes so it will lose whatever info there is.
Also, did you turn the water back on? It is not a good idea to run the pump unless there is water supplied to it.
What is the model number? I may be able to find troublehooting info for you.