One for all urc2060 need codes for sharp tv - Universal Remote Control

Enter your model of the tv and search for the tv manual.... http://www.sharpusa.com/CustomerSupport.aspx

OR
The following will take you to the instructional pages for the remote. Start with one of the two links below.

Your remote will set up in one of the following ways:
Set Up #1

1. Press the button for the device you want to program, then release.
2. Press and hold the Magic button until the red LED gives a delayed blink.
3. Continue holding the Magic button while you enter your 3 digit code.
4. You should receive 2 quick flashes after entering your code.

1. Press the button for the device you want to program, the release.
2. Press and hold the Magic button. You will see two blinks on the remote. Release.
3. Press the three digit code for the device you want to program.
4. You will see two blinks. Your remote is now programmed for that device.