Question about Kyocera Copystar CS-1820 Black and White Copier

1 Answer

I have a KM 4050 and when we scan it is giving a "send error 2101" Everything else is fine. We are able to print from our computers etc. so I know our connections are ok. Any suggestions?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 200 Answers

The following errors are simalir;

2101, 2102, 2201, 2202, 2203, 3101:

The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is not set correctly. Use COMMAND CENTER and register the SMTP server name and the host name correctly.


The link below takes you to Kyocera's Scan to SMB setup guide on GFBM's website (they are a Kyocera dealer). The guide setup guide is good and gives pictures and examples.

http://gfbm.net/Documents/self_help/SCAN%20TO%20SMB%20PC%20setup%20R3.pdf

I hope this is helpful,
Shawn

Posted on Feb 20, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My kyocera 4050 is showing cfb31. How do I solve the problem?


Hello,
the error is a system error if the following error code is displayed. When an error has occurred, clear the error by turning the main power switch off then on.
These error type should be reseted by restarting the machine
CF1XX, CF2XX, CF3XX, CF4XX, CF5XX, CF6XX, CF7XX, CFAXX, CFBXX, 0xFBXX

Best regards,
Marius

Nov 14, 2016 | Kyocera Km-4050 With Feed, Finisher, Bank,...

2 Answers

How can i fix error code cfb31 which appears on my kyocera km-4050 printer


Just generally CF-B31 firmware errors can be caused by a bad CODE DIMM, main board, or operation panel.

Try loading new firmware ...

I’m happy to assist further over the phone at https://www.6ya.com/expert/ronald_f3c54257e2cc2559

Aug 21, 2015 | Kyocera Km-4050 With Feed, Fax, Finisher,...

3 Answers

How to set system to print in color


KM-3050/4050/505 is a pure Black & White MFP

Oct 18, 2014 | Kyocera Tk-717Km-3050/4050/5050

1 Answer

Kyocera service codes


It's a firmware mismatch error did you just replace the touch screen or the whole control panel

Aug 25, 2014 | Kyocera Km-4050 With Feed, Finisher, Bank,...

1 Answer

We are using KM 4050. Everything is fine, We can print, copy, but we cannot scan to email. It started yesterday. I check all the setting, cable, I even change to use gmail SMTP server. it still gives me...


You cant can to email using gmail server. they have hundreds of different servers. would reccoment setting up scan to folder either to a shared folder on your server or straight to your c drive if needing some confidentiality

Oct 16, 2013 | Kyocera Km-4050 With Feed, Finisher, Bank,...

1 Answer

Color rendition is way off on Brother 4050 (4040/4070)


Run a self calibration cycle a couple of times, and also clean the laser scanners.

Nov 22, 2017 | Brother HL-4040CN Laser Printer

3 Answers

ERROR CODE 2101 WHEN TRYING TO SCAN


you have to have a user name and password set up on the computer you are scanning to then you set theat up in the address you set up on the copier.

Oct 30, 2008 | Kyocera Copystar CS-1820 Black and White...

1 Answer

KM 3060 Scan Error 2101


Hi Guys,
I was getting the 2101 error as well. I resolved this by placing the IP address of the computer into the "host name" field. Only thing to remember is that your IP address will change from time to time. You will need to assign a static IP to that particular machine or give it a reserved IP address through your switch. Good luck!

Oct 14, 2008 | Kyocera Mita FS 3800 Laser Printer

Not finding what you are looking for?
Kyocera Copystar CS-1820 Black and White Copier Logo

3,674 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...