Hi
I currently have a fault with the above dishwasher where it runs through the first part of the wash cycle but then stops and flashes lights 1 and 2, how can i fix this issue as the wife is getting sick of washing up!!!!!!
Thanks, Dean
2,845 views
Usually answered in minutes!
hi mine keeps tripping the electric just after it has tried to put some water in it, i have blown the waste pipe and sometimes it goes throught and bubbles come out of the machine and other times i cant get any air down the pipe, i have filled it through the waste pipe with hot water trying to clear it but it still keeps tripping the switch. can you suggest anything else as i thought it was blocked but then it drained out, it did fill through the waste pipe and now it wont. cant get to the end of the pipe in the machine without taking all the bottom off or can i?
Just happened, this the problem you have with easy single push function buttons, no way of knowing what fault is. Still no conclusive answer to the first two lights fully on tho? any ideas?
I have the same problem - the first two lights come on. I suspect that there is a blockage somewhere because the water in the machine doesn't drain. The filter seems pretty clear, so I need to investigate further. Someone else suggested that the issue could be a blockage in the pump. This seems a logical conclusion - I will check this next.
Same problem. Won't drain and flashes lights 1 & 2.
Faultfinding section of the Indesit manual gives meanings for several combinations of flashing lamps, but not this combination! Fault started about a week after one-year gurantee ended!
anyone have any solutions to the non draining of the water and flashing 2 lights?
Mine starts normally (I put it on cycle 1), and then stops on cycle 3, without completing the full wash.
same here, starts cycle then stops and bottom filled with water. how do i drain it and what are the flashing lights! Seems like indesit not that great after all!
Same thing has happened to me...i have only had the washer 2 weeks...have called out the engineer so will post the solution when i get an answer
mine 2 can any one help
×