My Kenmore Elite HE5T front loading washer is giving me an F20 (Water inlet problem - no water or insufficient water supply) code. The Drum fills half way up with water in about 5 minutes and then the code comes on. There doesn't seem to be an insufficent amount of water. I checked the drain and it is clean and clear. Any other suggestions?

The F20 error deals with the water coming into the tub. The F20 code indicates the control didn't see any water enter the tub.

1. There is a flow meter that tells the control water is coming into the washer. If the flow meter is faulty the error usually happens quickly.
2. Near the pressure switch is a clear plastic hose may be kinked or even have a small hole in it. Check the drain line first and then remove the top of the washer to access the pressure switch and pressure hose. With the washer empty remove the hose from the pressure switch located on the right side of the washer and blow through it to clear any debris blocking the pressure hose or air trap.
3. If this doesn't help then most likely you will need to replace the pressure switch.