I am having trouble with my washer. It is showing the F28 error code and then when I get that fixed, it shows the F20 error code. Can you please tell me what to do to get it running again. Thanks

Question edited for clarity.

A Miele Washer F20 error code generally means that the drain pump filter is clogged and needs to be cleaned.

Miele Washer F20 - Troubleshooting Guide - HowToFixit.Net

Videos as well

https://www.google.com/search?q=miele+washer+error+code+f20

..

Do it yourself Patricia. Take off the front panel lower left. Put a baking tray under it and remove the filter and clean it.

A Miele Washer F20 error code generally means that the drain pump filter is clogged and needs to be cleaned.

Miele Washer F20 - Troubleshooting Guide - HowToFixit.Net

Display shows F20 or FH - Front-load washer ' Whirlpool ...

https://www.whirlpool.com/...fh-front-load-...

Whirlpool Home AppliancesQuestion: Display shows F20 or FH - Front-load washer. Answer. Image. or. Image. or. Image. This error code indicates a water supply problem. Are both the hot ...

whirlpool duet error code FH - Appliance Repair Forum

forum.appliancepartspros.com > Appliance Repair Help > Washer Repair

Jan 5, 2009 - 10 posts - ‎1 author
... Repair Help > Washer Repair » whirlpool duet error code FH .... FH No water detected entering machine or Pressure switch trip not detected. Whirlpool Duet diagnostic code C:03 error code FH
1 post
Dec 5, 2014
Whirlpool Duet Washer HF Error Code
3 posts
Jun 10, 2013
FH Error Code on Whirlpool Duet Washer
2 posts
Mar 11, 2013
FH error code
9 posts
Sep 13, 2008
More results from forum.appliancepartspros.com

Stumped on error code FH for Whirlpool Duet front load washer .

Hi

This code indicates an electronics communication problem with the washer.Please check this link to get a detailed idea related to the lists of codes and the resolutions to them:-

http://whirlpool.custhelp.com/app/answers/detail/a_id/2885/~/display-shows-an-error-code---front-load-washer

The error code F28 means one or both of these parts are bad.
Motor Control Unit ,Microcomputer Machine Control Unit .
It would be a good idea to order both, as both components have been problematic for error code F28.

Please get back to us if you have further query or else please accept the solution.

Thanks for contacting fixya.com

The error code F28 means one or both of these parts are bad.
Motor Control Unit (8540135)
Microcomputer Machine Control Unit (8540788)
It would be a good idea to order both, as both components have been problematic for error code F28

If you find either the MCU or the CCU(Microcomputer Machine Control Unit) fixed it.

You can download the online repair manual in the below link

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/6545d78b3f479480852571650061b1ba/$FILE/8178558.pdf

On page# 4-20 it shows how to access your MCU.

Pretty sure that F20 is a pump or drain error. Take a look at my article http://www.fixya.com/support/t3144835-not_draining_water_not_spinning This may help

The following provided by fixya has the solution to error F20.

Click here for detailing on F20 Error

Good luck and please do rate my answer.

The following link explains the "F20" error code:

http://www.fixya.com/support/r1491905-f20_error_code_whirlpool_duet_kenmore

I recommend checking your washer installation for a possible siphoning condition and kinked fill hoses, first, as these are the easiest items to rule out.

If you have questions, please let me know. I hope this helps you.

be sure to ck fill hoses make sure both are turned on all the way ..remove hose at washer end ckd screen inside inlet for sand/rust/gunk pull screen out to clean and be sure to reinstall it or you're asking for trouble down the road..also ck faucet end just in case someone installed one there 2..by the way just having cold water only on will cause same problem