I have and Insignia Blu Ray player NS-2BRDVD I have purchased some new Blu Ray DVDs and they will play.I was wondering if Insiginia has updates available, like Sony does,they are sending me a disc to install updates on my Sony player. Thank you

You cannot upgrade it. If it was not made for DVD's then there is no upgrade you can do.
If it was doing DVD's and now it does not, it is the beginning symptoms of a bad laser reader assembly.
e

This Blu-ray player will not read HD (high density) DVDs. The format is not the same as a blu-ray. You would need an HD DVD player. (if you can find one - they are rare.) If you are having trouble reading specific Blu-ray discs, you should check if there is a firmware update for the unit on the Insignia site. Start at http://insigniaproducts.com/ and look for downloads for the NS-WBRDVD2.

The NS-WBRDVD2 reads Blu-rays, DVD-ROM, DVD-RW, DVD+RW, DVD-R, DVD+R, CD-R, CDDA (audio CDs), CD-RW, MP3, MPEG4, JPEG. Discs burned on DVD recorders/computers must be finalized to be played on the unit.


The manual for the unit is available from Insignia here: http://insigniaproducts.com/cms/documents/NS-WBRDVD2-WBRDVD2-CA_10-0745_WEB_ENG_V4_Final%20lr.pdf .

I hope this helps.

Cindy Wells

Unfortunately, this model Blu-ray player is no longer supported for firmware updates.

Hi,
Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1

Best Regards, Jay__6t5r

That is because the Disc is coded for Region 3 and your player is coded for Region 1. See

http://dvdbuyingguide.com/codefreedvd/bigfaq.html

The following hack may make your player region free:

http://www.videohelp.com/forum/archive/region-hack-for-new-insignia-ns-pdvd10-t337342.html

Unfortunately, there isn't a code we can provide. Try your universal remote's scan or learning feature to find a code.

If you are using the BRDVD there is only one update and it is a few months old. They are adding new security features to new Bluyray discs this month and all players out there need to be updated. The unfortunate side of the BRDVD is that Insignia is refusing to update the player although Funai(the comany that has made the player for them) has released a update that would work with it with little work by insignia.

To help get this player updated it would be good to go to the forums here and post that you still use this player. We got a update the first time so it should be possible to get another.

Good luck and enjoy this little player.

go to www.insigniaproducts.com and get the firmware update. It walks you through how to update it. It worked great for me

Insignia says it will not work with a universal remote there is no code.

Install this firmware update: http://www.insignia-products.com/t-NS-2BRDVD_FW_Update.aspx