I have a 4.4 ir/uhf pro dish network, i did oened and i an not close it because does have a part that i do not know how it goes, this part is only in the #2 remotes thats mean in the 2nd tv and has a part attached to a gray plastic tick cord and is not tell me which way goes, now i can not close the back part.

Hola! Siga este vinculo, http://www.mydish.com/support/apps/remotecodes.aspx seleccione el modelo de control (este se encuentra en la parte de atras del control) Una vez usted haga esto, seleccione el tipo de aparato al cual necesita programarlo Y despues la marca de la TV. Una vez usted haga esto le aparecesaran los codigos que posiblemente funcionan con su TV. Si tiene preguntasadicionales, sientase libre de contactarme a: [email protected]

Kimberly Escobar
Social Media Representative
DISH L.L.C

I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at [email protected]!

Look up codes for TV here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

DD Cox,

I can definitely provide more information. Without knowing the model of the sound system, I am unable to provide specific codes. Below I will include a link to lookup codes, as well as the steps to address the remote.

Link: http://www.mydish.com/support/apps/remotecodes.aspx

Addressing Remote to DVD:

1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and AUX light will be blinking.
3.) Press 2 and enter the code. (Example: If the code is 639, enter 2639)
4.) Press pound (#)
5.) Try functions (Power, Volume, etc..) and see if it is working.
6.) If no function, repeat steps 1-4 with another code.

Let me know if you have any other questions!

Tommy Faust
DISH Social Media Representative

Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link http://www.mydish.com/support/teach-learning-remote-20-21 can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

codes for DISH Network IR Remote Control

nmg55

Not all remote are compatible with all our receivers. Depending on the receiver and remote model numbers, if they are compatible you can readdress the remote to the receiver. I have provided a link for readdressing the remote to the receiver. I hope this helps.

Instructions on how to readdress the remote to the receiver:
http://www.dishnetwork.com/SupportSection/remote-setup
Remotes and receivers models:





222 -
21.0 IR / UHF Pro


222k - 21.0 IR / UHF Pro


301 -
3.4 IR


311 -
3.4 IR


322 -
4.4 IR / UHF Pro


381 -
6.4 IR / UHF Pro


411 -
20.0 IR


501 -
6.4 IR / UHF Pro


508 -
6.4 IR / UHF Pro


510 -
6.4 IR / UHF Pro


512 -
6.4 IR / UHF Pro


522 -
6.4 IR / UHF Pro


612 -
21.0 IR / UHF Pro


622 -
21.0 IR / UHF Pro


625 -
6.4 IR / UHF Pro


722 -
21.0 IR / UHF Pro


722k - 21.0 IR / UHF Pro







Ray Calo
DISH Network

There is a key in the bottom that has number 2 on it . Turn the key over to number1 and slide the button under the battery cover if needed from a to b or vise versa

call dish network. they have all the information you could possably need.

their phone number is inside your recivers manual

The code for the 6.3 ir/uhf pro remote when set to uhf is 794. Fist hold down aux until all lights blink then press 2 then enter 794 and press #.

i would suggest trying power scan again...

1)hold down tv button next to sat button in top left corner
2) when all buttons illuminate press 500 into remote
3)press pound sign
4)Hello, please help..
5)hold town tv button again.
6)when all buttons illuminate press big red power button
7)press up arrow once a second until tv shuts off
8)press # pound sign
9)try to turn tv back on w/ big red power button
10)if tv doesnt turn back on try again from step 2 but use down arrow instead

if this doesnt work try addressing your old remote to the receiver by pressing record from system info screen