I need the code so i can link my virgin media+ remote to volume control

Virgin Media Remote Control Codes

www.virginmedia.com/.../vplus-remote-control-codes.php

Virgin MediaYou can set-up your Virgin Remote Control to operate the Volume and Mute functions on your TV so you only need one remote to watch TV. Firstly, please select ...Missing: vm202 ‎alcatel

Customise your TiVo remote to control your TV - Virgin Media

www.virginmedia.com/tivoremotesetup/

Virgin MediaTo clear your changes and reset your remote to its original settings: Press and hold down and on the remote at the same time until the light on the top of the remote flashes green twice. Press three times, then press. The LED will flash green four times and exit programming mode.Missing: vm202 ‎alcatel

Virgin Media VM202 review by 3G.co.uk

Set-up instructions are so much to type in here, and is not possible too. If you wish to get more details, check the sites linked here. It has set-up code list and set-up procedure to most popular remote controls. http://electrohelponline.blogspot.com/ http://electronicshelponline.blogspot.com/ Pull up previous posts there, either by type in the model name to your set in its search box, or view it in Timeslide / Mosaic option.

you can download the code from www.fitness.manualsonline.com or www. remotecodelist.com
2'= clean the contacts batteries very well
3= retight the spring contacts batteries with pliers for better contacts
4= open the r. control for clean the keypads switchs, for dirty, oxide, etc. in order to send the GOOD signal infrared to the receiver.
5= if the problem persist you must go to the repair shop TV for fix it or replace.
God bless you

To set up the volume control on your Telewest remote control, to be able to change the TV volume, please follow the instructions below.
1. Using the table below find your make of TV and the code which matches it.
2. Press and hold down Volume + and mute on your remote control at the same time for at least three seconds, until the green light in the top right-hand corner of your remote control flashes twice.
3. Release the buttons and enter the first four digit code from the table below. (You must do this within ten seconds).
4. As you enter the first three digits the green light on your remote control will give a short blink.
5. As you enter the fourth digit, the green light will flash twice to confirm that the volume is set.
If setting the volume is not successful, please repeat the above steps with the second or third codes from the table below.
Samsung 0065, 0584, 0037

Hello,

Since you haven't mentioned the EXACT model of your remote, I can't exactly tell you the instructions. BUT you may choose your EXACT remote and refer to the instruction / codes from this link:

Virgin Media Remotes

I hope this helped you.

You can rate my answer if you appreciate my help.

Thanks!

-damneddle

just tried 0079 from another forum and it's worked for me!

I need help with remote control rca r5464 for orion tv

For the V+ remote control (Virgin Media have a picture of it here - http://www.virginmedia.com/images/types7-8n.jpg - the code is 0079.

Try 0079 for volume buttons

what you have to do is ring virgin and ask then to send the code.
this code is done stight to your set top box