Hooked up to TV but can't get the sound leads to work. No sound from TV?? Can anyone advise please? Lorna x x x

Your tv should have rcas out (white and red). Out of them to any input on amp.

Hi AB, best way to accomplish this would be to go from the TV's audio output to any open audio input on the 606 and just be sure that you assign the source to the input. If you require further assistance please feel free to give us a call at 800-229-1687, also note that we offer a trade in program if you are looking to upgrade to a newer receiver, please email me your current units serial number and I will advise if it qualifies for the program. You can email me at [email protected], Thanks, JT

Kindly check first if the batteries of your TV remote ( medium to change input ) are fresh. After that please check again the button on your TV remote for INPUT, SOURCE, or TV/VIDEO and it should give you input lists.

you need an additional HDMI going from your tv "AV IN" to your HTS "AV OUT"

you will need red and white ended lead conected between tv and hd box
audio out on hd box and audio in on tv

Take out all of the leads going to the tele and replace them again. Make sure any hardware you have hooked up to the tv has the leads inserted correctly

Hi! Happy to try to help. Make sure you have completed all the steps in the order they appear as on the quick set up sheet included with your system. Check to see if you have the wii both plugged into the tv as well as the power outlet. You should be able to get hooked up using the 3 color a/v cord, this is what works for us. Do you still have the manual? Be sure to check page 18 of the white Wii operations manual to be sure you are using the correct input setup. Please give me a great rating if I have been of help. Otherwise, please let me know how else I can help. Thanks!
:)

me too i want to know

try this

I would suspect the lead from your tv or video and swap this.ie where are you feeding tv signal to amp from.more than likely faulty lead or socket at this point.swap around the leads and see does fault transfer to the opposite channel.keep with it sounds like set up problem of some sort,.