99% the problem is in fusing section. The fuser fixing film is not well lubricated or even damaged. It has to be replaced with new one, or just cleaned and lubricated again. Also there can be a problem with pressure roller, or pressure roller bushings, but you have to disassembled the fuser to see.
good luck
pifonski
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
82 views
Usually answered in minutes!
×