Problem in Copying Recorded Material from Hard Disk to a Blank DVD
Recently my Samsung DVD Recorder HR 720 is having a the following problems when I try to Write the material Recorded on it's Hard Disk Drive to a Blank DVD Disc AT HIGH SPEED COPYING MODE.
a) Either it is saying that this Disk is neither Recordable nor Playable and Rejecting it.
b) Most of the time it is Stuck Up Indefinitely while Copying and display DOES NOT Progress beypund a certain Percentage ( say 2% to 55%).
c) Even After copying is done sometimes it shows Error while Finalaizing the Disc .
Similar problem is described here http://www.fixya.com/support/t562814-hr_... - does not depend if writing is high speed or not, depend only on media - the only working medium is SONY DVD -RW 1x-2x compatible (box labelled yellow-white,medium gold), so I have to write it to this media and then copy it to any DVD -R on computer Similar problem is described here http://www.fixya.com/support/t562814-hr_720_not_burn_dvr_r_media - does not depend if writing is high speed or not, depend only on media - the only working medium is SONY DVD -RW 1x-2x compatible (box labelled yellow-white,medium gold), so I have to write it to this media and then copy it to any DVD -R on computer
Recently my Samsung DVD Recorder HR 720 is having a the following problems when I try to Write the material Recorded on it's Hard Disk Drive to a Blank DVD Disc AT HIGH SPEED COPYING MODE.
a) Either it is saying that this Disk is neither Recordable nor Playable and Rejecting it.
b) Most of the time it is Stuck Up Indefinitely while Copying and display DOES NOT Progress beypund a certain Percentage ( say 2% to 55%).
c) Even After copying is done sometimes it shows Error while Finalaizing the Disc .
d) also I have big problem with remote control ar buttons on DVD, when I wan't to chage from DVD to HDD or stop it
Please help by replying to my e-mail [email protected] I have the same problem as:
posted by psdey on Jul 30, 2008
Recently my Samsung DVD Recorder HR 720 is having a the following problems when I try to Write the material Recorded on it's Hard Disk Drive to a Blank DVD Disc AT HIGH SPEED COPYING MODE.
a) Either it is saying that this Disk is neither Recordable nor Playable and Rejecting it.
b) Most of the time it is Stuck Up Indefinitely while Copying and display DOES NOT Progress beypund a certain Percentage ( say 2% to 55%).
c) Even After copying is done sometimes it shows Error while Finalaizing the Disc .
d) also I have big problem with remote control ar buttons on DVD, when I wan't to chage from DVD to HDD or stop it
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
not sure if this will solve your issue. But in order to be able to see the DVD recorded on the HR720 (or typically any other DVD recorder) you need to "lock" it. This is done in the File Manager Menu. The DVD recorder will ask you twice, whether you want to "lock" the disk. Once you have done that it will format the DVD like a normal DVD-Video, meaning it can be played on any regular DVD player. However, once locked you cannot re-open the DVD.
Hope this helps. Otherwise check in the user manual under "recording a DVD" - it is mentioned also there.
See if a shop will clean the optical assembly for you at a reasonable cost. Also, if you have the "finalization" feature turned off, this will cause a disc to show that message...accordianman
I had exactly the same problem -- error message of "This disc can be neither played nor recorded. Please check the disk [EC:0207]" after the machine had been working fine for a year. I downloaded the latest firmware from the Samsung website, burned it to a CD-R disk (took three tries until the DVD Recorder recognized the disk -- worked when I used Rocio CD Creater software), then loaded the firmware updates to the DVD Recorder. On the Samsung website you can retrive the firmware update instructions as well. I had to perform the firmware upgrade several times until it successfully updated both the system firmware as well as the disk firmware. After successfully updating both, the Recorder now recognizes the DVD-R disks and I was able to resume recording. I have however, noted some choppiness with the playback of the newly recorded disks. Other than that, the firmware upgrade successfully resolved the problem.
The reason why you are having this problem is because you haven't finalized the disc. In able for you to play that Burned DVD that you have you need to Finalized the disc.
Finalizing a recordable optical disc means writing the disc's lead-in (the Table of Contents or TOC) and lead-out information (blank data that fills up the unused space at the end of the disc) so that a DVD player will know where the various tracks begin and end. Without the TOC, a conventional DVD player will not be able to read the contents of the disc.
Once the disc is finalized, no more information can be written to it. Finalizing takes about two or three minutes.
To finalize a DVD-RW/DVD-R:
1. Press the Menu button with the disc stopped.
2. Select Disc Manager and press Enter or the right arrow.
3. Select Disc Finalize and press Enter or the right arrow.
You will be asked twice if you are sure that you want to finalize the disc. Select Yes and press Enter.
Once the disc is finalized, you cannot delete entries from the record list. After being finalized, the DVD-R/DVD-RW (video mode) operates in the same manner as a DVD-Video. Recorded discs must be finalized in order to play back in non-Samsung DVD players.
A DVD-RW disc that has been recorded by DAO (disk-at-once mode) in a PC cannot be unfinalized.
A DVD-RW disc that has been recorded in Video Mode on a non-Samsung recorder cannot be unfinalized by a Samsung recorder.
A DVD-R disc cannot be unfinalized.
Note: Finalization does not apply to DVD-RAM.
If you cannot finalize a DVD-R or DVD-RW disc, make sure that Disc Protection is turned off. If you are still having difficulty, you may try calling technical support of SAMSUNG.
Note: Do not turn the recorder off while it is finalizing the disc. Data on the disc will be damaged if the finalization process is interrupted.
When you recorded your "footage" was the dvd recorder set to 2hr (sp), 2.5hr (spp), or 3hr (LP), etc.?Because for example, you downloaded (recorded to your hdd)your "footage" that is say 3hrs long, and your recorder is set to record at 2hrs mode(sp), then when you put a blank dvd in recorder to transfer from hdd to blank dvd, the 3hrs of your "footage" has been recorded in 2hr mode on your hdd, and will only record in 2hr mode onto your blank dvd. Solution is to set your recorder to the record mode in which your "footage" length is. For example, if your "footage" length is 3hrs, set your recorder mode to LP then when you insert your blank dvd should be okay. Or, set your recorder mode to 2hr (sp) and make two recordings of your "footage" onto hdd, splitting them up: 2hr on one, and 1hr on the other.When you burn to blank dvd you will have to have 2 blank dvds, one for 2hrs, the other for 1hr. I had to same thing happen to me. I hope this works for ya.
You can contact me also on my official e-mail address [email protected]
Similar problem is described here http://www.fixya.com/support/t562814-hr_... - does not depend if writing is high speed or not, depend only on media - the only working medium is SONY DVD -RW 1x-2x compatible (box labelled yellow-white,medium gold), so I have to write it to this media and then copy it to any DVD -R on computer
I have the same problem as:
posted by psdey on Jul 30, 2008
Recently my Samsung DVD Recorder HR 720 is having a the following problems when I try to Write the material Recorded on it's Hard Disk Drive to a Blank DVD Disc AT HIGH SPEED COPYING MODE.
a) Either it is saying that this Disk is neither Recordable nor Playable and Rejecting it.
b) Most of the time it is Stuck Up Indefinitely while Copying and display DOES NOT Progress beypund a certain Percentage ( say 2% to 55%).
c) Even After copying is done sometimes it shows Error while Finalaizing the Disc .
d) also I have big problem with remote control ar buttons on DVD, when I wan't to chage from DVD to HDD or stop it
Please help by replying to my e-mail [email protected]
×