Question about Kyocera FS-1016 Printer

2 Answers

My kyocera say call service error 6000 what can i do?

Posted by on

  • Rodney Watts
    Rodney Watts Mar 06, 2011

    Are you sure it just says service error 6000 or 6010?

  • hajaj
    hajaj Dec 28, 2014

    yes

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 200 Answers



Broken heater lamp error

The temperature won't rise by 1°C/33.8 °F during warming up and the heater is turned on for 5 seconds.

The temperature won't rise by 1°C/33.8 °F during printing and the heater is turned on for 5 seconds with the duty cycle more than 60%.


1. Defective fuser thermistor.

2. Broken thermal cutout or heater lamp.

3. Defective engine/high voltage PWB.


Turn power switch off, and remove power cord.


Detach YC7 connector on the engine/high voltage PWB.


Measure resistance between pins 1 and 2 of the detached connector.


Open (infinite)?

Yes Then - Replace the fuser thermistor.

No Then - Detach YC1 connector on the power source PWB.

- Measure resistance between pins 1 and 2 of the detached connector.

Open (infinite)?


Yes - Replace the thermal cutout or heater lamp.


No - Replace the engine/high voltage PWB.


I hope this was helpful,
Shawn

Posted on Mar 11, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hallo,
My kyocera say call service printer error 16400. what can i do?

Posted on Jun 06, 2011

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 300 Answers

SOURCE: CALL SERVICE 6000:0115785

Error 6000: is a fuser error 0115785 is your page count. You require a replacement fuser

Posted on Apr 14, 2009

SOURCE: Kyocera Mita 1500 Error code 6000

This C6000 error code is triggered by a few things all having to do with the fixing heater wire. Ask your technician to check the thermistor, the thermal cutout and the connection between the thermistor and the power supply board. My guess would be that the power surge overloaded the power supply board. This is not something that can be reset and may require new parts.
The manuals that describe the error codes are only available to Kyocera technicians, sorry.
Henry

Posted on May 26, 2009

Nikolay Boychev

  • 525 Answers

SOURCE: kyocera FS-1016MFP "printer error service

Code: 6000
Contents: Broken heater lamp error
The temperature won't rise by 1°C/33.8
°F during warming up and the heater is
turned on for 5 seconds.
The temperature won't rise by 1°C/33.8
°F during printing and the heater is
turned on for 5 seconds with the duty
cycle more than 60%.

Causes:
- Defective fuser thermistor.
- Broken thermal cutout or heater lamp.
- Defective engine/high voltage PWB.

Posted on Feb 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C-6000 error in Kyocera TA 180


reset error via service mode 163 and test

Jul 09, 2014 | Kyocera Mita KM-3035 All-In-One Laser...

1 Answer

Service error 6000


The service manual is located here: http://servicemode.ru/images/stories/files/kyosera_fs_1010_sm.pdf
Under section 6-16 you can find error (5) 6000.
It is a fuser unit error.

Jan 12, 2014 | Kyocera FS-1016 Printer

2 Answers

Kyocera fs-4020dn; Error code 6000


Be sure to power down and disconnect the power first.
A fuse it is blown within the fuser unit - replace that fuse or call a technician to do it for you.

Nov 25, 2013 | Kyocera FS Office Equipment & Supplies

1 Answer

Hi, I have an ecosys fs 2000d, with a call service message 6000:0026965, somebody help me please


Call service message 6000 in Kyocera is a fuser error code. The fuser must have gone bad.

Regards,
Shrey

May 31, 2011 | Kyocera FS-2000D Laser Printer

3 Answers

Kyocera FS-1016MFP "printer error service


Code: 6000
Contents: Broken heater lamp error
The temperature won't rise by 1°C/33.8
°F during warming up and the heater is
turned on for 5 seconds.
The temperature won't rise by 1°C/33.8
°F during printing and the heater is
turned on for 5 seconds with the duty
cycle more than 60%.

Causes:
- Defective fuser thermistor.
- Broken thermal cutout or heater lamp.
- Defective engine/high voltage PWB.

Feb 02, 2011 | Kyocera Mita Fs-1016 Mfp Multifunction;...

2 Answers

C-6000 error


plz my printer is Kyocera TASKalfa 220 and I have error c-6000.
can you help me to fix it ?

May 05, 2009 | Office Equipment & Supplies

1 Answer

CALL SERVICE 6000:0115785


Error 6000: is a fuser error 0115785 is your page count. You require a replacement fuser

Apr 14, 2009 | Kyocera FS-2000D Laser Printer

4 Answers

ERROR c-6000


Hi, enter 10871087 on keyboard of machine, then enter 163.After that press "execute" and start button.machine will restart and will be ready to copy.Otherwise,call service.

BR

Jan 26, 2008 | Kyocera RI-3530 Black and White Copier

Not finding what you are looking for?
Kyocera FS-1016 Printer Logo

4,346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...