Kyocera 5050 error code 2202 - Kyocera Mita KM-5035 Printer

This is an error is indicating a connection error when using the send feature.

Below I have provided some information or for more information download the users guide from the manufatcures website using this link. http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?pid=16088&rid=16313

2101, 2102, 2103, 2201, 2202, 2203, 3101:

The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is

not set correctly. Use COMMAND CENTER and register the SMTP server name and the host name

correctly.

2204: The E-mail size exceeds the acceptable send data capacity. Decrease the size or resolution of the scanned data to be transmitted and resend the E-mail. 5101, 5102, 5103, 5104, 7102, 720f:

Turn the main power switch off and back on. If this error occurs several times, make a note of the displayed error code and contact your service representative.(Refer to the corrective action for the error message " An error has occurred.")

9181: The scanned original exceeds the acceptable number of pages of 999. Send the ecess pages separately.

Hope this is helpful,

Shawn

Found that we needed to increase our server timeout to 60 seconds, then the 2202 error when away.