Hello 1. Turn on the TV receiver 2. Press TV on the Sky Remote Control 3. Hold down SELECT and the RED buttons together for approximately two seconds, until the RED LED on the Sky remote blinks twice. 4. Enter three digit code from list for the receiver (early versions now flash twice). 5. Press select to enter code structure (the LED will flash twice if a valid code has been entered). 6. Now press the STDBY button and test other functions. Repeat if necessary until a code is found that works most common functions
Codes to check for LG with Sky are;
065 244 405 318 037 398 191 459 245 389 080 275
Identifying remote TV Remote Control Codes (Blink Back)
If there is not a 3 digit code listed for your customers TV receiver then use the four digit method to find a code that works. The following steps will allow this code to be identified.
1. Press the TV button on the Sky remote
2. Hold down Select and the Red buttons together for approximately two seconds, until the Red LED on the Sky remote blinks twice.
3. Key in 990 on the remote.
4. Key in 1 on the numeric keypad and count the number of times the Red LED blinks. The number of blinks will indicate the first digit of the code
(Note that a 0 is represented by no blinks where you press the key)
5. Input 2 on the numeric keypad and count the blinks to identify the second digit of the code.
6. Input 3 on the numeric keypad and count the blinks to identify the third digit of the code.
7. Write it down and keep it safely Sky Remote "blink back"
1. Press the TV button on the Sky remote
2. Hold down Select and the Red buttons together for approximately two seconds, until the Red LED on the Sky remote blinks twice.
3. Key in 990 on the remote.
4. Wait until the Red LED blinks twice, then key 1 (no LED response)
5. Key in 2 on the numeric keypad and count the number of times the Red LED blinks. The number of blinks will indicate the first digit of the code
(Note that a 0 is represented by no blinks where you press the key)
6. Input 3 on the numeric keypad and count the blinks to identify the second digit of the code.
7. Input 4 on the numeric keypad and count the blinks to identify the third digit of the code.
8. Write it down and keep it safely.
×
499 views
Usually answered in minutes!
×