I am after the default password for my datamax printer class 1 so i can change the ip address in the printer console. Thanks, Chris..

Go back into Menu on the printer & reset the network. The Network that is working on your computer.

I’m happy to help further over the phone at https://www.6ya.com/expert/wynn_5ba0205233ebfc15

To view or set the IP Address on a Datamax I-4208, use the Front Control Panel on the printer and follow these steps:
Press Menu, go to Communications, then NIC Adapter, then IP Address.

you need to go to menu mode configuration. 1 will go up 2 will go down the menu items ent is the select.
go to nic adapter and go to wired dhcp you can disable dhcp there and configure the IP address

Reset your router back to it's factory settings by holding the reset button for about 5 seconds. I have provided a list of the most popular router brands. If it does not work you may need to google what your specific model's default IP address/default username/default passwords are, for example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it can depend on where you obtained your router. If you purchased it yourself from a store then the standard defaults should work. If you obtained your router from your Internet Provider you may need to contact your service provider. It also may depend whether it's an old or new model router as well. And you may need to press and hold the reset button on your router several times before it actually clears. Make sure you have a wired connection then once you have accessed your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is: 192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or 192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

If you are changing length(feed length) you may have to recalibrate the printer . Also ensure that your print format is the correct length for the stock.
You can look at the setup of the printer using the datamax-oneil printer configutation program, or if it is using IP connection, you can go directly to the internal web page for set up. make the cal length 3 times the label length, or leave at the default value.

Usually you need ot set the discovery to disable and set a perminient IP address for the printer. When in discovery , depending you network, it may loose comms.
If your network is running DHCP. (192.168.x.xxx, try 192.168.1.200 /snm 255.255.0.0.

Also the dmxnet card takes a while to initialize(30 seconds).

Step 1:
Open a web browser such as Internet Explorer.
Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:

1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.

1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.

NOTE: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".

Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

The router can be set to factory default by performing either of these two steps:

Resetting the Router Using the Reset Button
Resetting the Router Using the Web-Based Setup Page

NOTE: Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. All of the settings of the router will then be erased and the router's IP address will become 192.168.1.1.

Accessing the Router's Web-Based Setup Page
NOTE:To access the router's web-based setup page using Mac, click here.
Step 1:
Open a web browser such as Internet Explorer.
Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:

1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.
If you forgot the router's IP address you can:

1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.

NOTE: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".

Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

Hi,

• Default Username / UserID on 2Wire Routers: None
  
• Default Password on 2Wire Routers: Wireless
  
• Default IP Address on 2Wire Routers: http://home/
  
• Default Netmask: 255.255.255.0

Hope this helps

Chris (ziraffa)

make a cold reset or NVRAM reset
To do a cold reset you power on the printer while holding down the go button for about 5 seconds and then release the button. If the button is held for more then 15 seconds it may do a NVRAM reset