Need to reset tv cant see it - Computers & Internet

It may be as simple as disconnecting the DVD player from the TV
and unplugging TV for an hour to reset. If you can reach the menu after connecting, review the manual and DVD options.

try looking for the code using the serial number. there may be a way to reset the remote

Unplug the TV for a few minutes it should reset itself.
Make sure the menu button is not stuck, if it is try cleaning the button.
www.aaatvservice.com

Try pressing the volume down button on the T.V. and the info button on the remote. Do this for at least 5 seconds and it will reset the T.V.

Tries tv unplug,replug it back like an hour later.That way to reset the tv back to the factory setting.The tv should work now,if not than the tv power supply board is problems and the causes.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

yes. you need to reset guide plus+. with factory tv remote, press.... menu, 7, 1, go-back, tv........ then press menu, 7, 1 , go-back, who-input....... then it will ask you to set up tv with your zip-code.

need password for v-chip block

it should be in the manual if you have it otherwise i would advise to enlist the help of a tv tech guy or keep searching the internet with your model number of your tv

We would need to know the model number for the tv to get started.

Make and model# must be provided.