At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Harman kardon hs100 dvd home cinema volume knob stuck on loud cannot turn volume up or down lost remote control speaker working ok cannot decide whether to have it repaired plus new remote about 150 pound in repairs or buy a new bluray player but been told i might need an amplifier to play through harman karman speakers.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No, phones don't have an infra-red transmitter. That would only work if the HK was connected to wifi and HK made an app and the internal circuity and logic to accept it.
Buy Harman Kardon DPR 1001 Digital Receiver (Discontinued by ... The receiver comes with Harman Kardon's programmed LCD remote control with EzSet ... I was planning to replace the speakers too, but now I'm having second thoughts!!
... 1001 Remote. Leave it to Harman Kardon to develop a groundbreaking full digital path receiver. ... Harman Kardon DPR 1001 owner's manual. MFR #DPR ...
Try to buy an original remote control. It will be very difficult to match this device with a universal remote control. Contact the nearest authorised service center for harman Kardon.
This is due to a audio output problem in the amp, first check the speaker wires for shorts, if okay! the audio output semiconductors must be replaced to remedy the situation.
The hum (50 or 60 Hz) is caused by the AC power getting into the entry point of the amplifier. Either the filtering capacitors from the powersource of the speakers have dried up - replace them - or there is a short in the cables. There is another possibility: if you have kicked the subwoofer box its transformer might have slipped from its fixings and now is touching the subwoofer speaker frame.
The only way to find which is to open the cases.
Most probably it's an internal problem with their power supply (a capacitor with broken soldering). It can be quite easily repaired by a person knowing which side of a soldering iron to grip ;) If you have a friend that's familiar with electronics, you can ask to take a look. If you don't, the repair shop will most probably want a flat charge, which will not be feasible.
If they are computer speakers try this: (remember i am doing this from a windows vista) on the bottom right hand of the screen there should be a volume key right click on it and click on playback devices then right click on your speakers and click properties and go to levels and turn down the volume from there and see does that work... hope this helps.
'Sounds' like you have overwhelmed the cone and split it or a solder joint has come adrift
Don't know about repair or replacement -Check makers website.
Chances are you have wrecked the cone and movement with the overly high input.
Nor repairable if this is the case.
Check out the makers website for more tech info
×