Need codes for one for all remote to reprogram dish network

Are the other buttons on the remote working fine? If not, you will want to replace the batteries. If so, you can reprogram your remote to your VCR. The link below will provide you with the steps and the link for the codes is provided in step 1.

http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf

Nick Franta
DISH Network Customer Service

dmmcgregor

I'm sorry you are having problems reprogramming your TV 2 remote to your LG TV. Have you replaced your batteries? If so, I have provided a link on how to reprogram the remote and how to perform a power scan. I will also give you several codes that should work with the LG TV. This is the link with the instructions for programming the remote to your TV. It begins with step 6.

http://www.dishnetwork.com/SupportSection/power-scan-instructions
If you have any other questions or problems, please respond to this site.
Ray Calo DISH Network

Hello, my name is Becki Barned, with Dish Network customer service. To get your tv to work those particular functions, you will need to reprogram the remote to the tv, finding a code that works all functions of the tv. Some codes will work the power and volume, but not the other functions. Try these steps:

1. Hold down the TV mode button until all lights at the top of the remote are lit up
2. Press the 3 digit code in
3. Press the pound button
4. Press the SAT button on the top left of the remote.

Here are the codes to try:
505
671
627
864
006

Hope this helps!

Hello! Daniel Busa with Dish Network's customer service here. try 590 its the most common sanyo code. Also try: 683,720,111,593,813,542,652

Hello! My name is Becki Barned, and I am with Dish Network Customer Service. It sounds like you just want to reprogram your remote, which is easy! There is no code to reprogram the remote. What you will need to do is pull the Smart Card out of the receiver( bottom left behind door) and that brings you to system info. Here, just hold down the SAT button on your remote, until all of the mode lights light up on the top of the remote, then release. Then press any number between 2 and 15 on the numeric keypad, press pound (#) then the record button (above the 3) and that will reprogram the remote. If this does not work, or you request further information, blog back or you can find us on Twitter!!!!

Hey there! I'm Becki Barned, and I'm with Dish Network customer service! For this, you may have already resolved this, but here's some info if not, and also for future use if needed: http://www.dishnetwork.com/SupportSection/remote-control Happy Troubleshooting!

Hello! My name is Becki Barned, and I am with Dish Network customer service! To reprogram your remote, you will want to be in from of the receiver box, and then follow these easy steps! http://www.dishnetwork.com/SupportSection/remote-control Blog if you have any other issues!!!!!!

I would need to get a better idea of what model remote you have. I would recommend viewing our remote codes found here: http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf

You can find the model # on the back of the remote at the top, and the codes on the above link.

To program remote to TV:
1. Hold the gray TV button until all lights on top of the remote turn on.
2. Let go and while TV is blinking enter the 3-digit code and press #.
3. Try to use TV functions like volume/power/mute.
4. If it works press SAT and you're good, if not repeat steps 1-3 with another code on the list.

Tommy Faust
DISH Network

Hello! Becki Barned with Dish Network customer service here! You just need to reprogram your remote. Make sure that you are in front of the receiver, then follow these simple steps. Hope this helps for the future! http://www.dishnetwork.com/SupportSection/remote-control

http://www.carltonbale.com/project/dish-network-universal-remote/

go to this website and you will find the codes and all of the other related info you may need. please rate my answer as a fixya!