There are two connectors that attach to your drain pump, a black and a brown. They attach to the metal contact on the pump, it doesn't matter which one goes where, they are interchangeable.
When you put the front panel on, there is a door switch connector you need to attach before you put the screws back to hold it in place. After, the connectors on as you attach the top display portion of the washer. They are color coded, put the back into where the connector match with the size and colors on the main board.
Afterward, you can put everything back together and test the washer. Everything should light up and turn back on as normal before. Do not forget to put the particle filter trap back into the pump after everything is together on the bottom left corner of the washer or else it will leak lots of water when you do a wash.
Hi,
Here is a tip that I wrote about the LG OE Code and the causes and fixes...
Here also is the complete list of LG Codes
heatman101
..,/.
219 views
Usually answered in minutes!
×