Question about Vision Fitness T9550 Folding Treadmill

Open Question

I have a Vision Fitness T9000. I press start and feel the belt start to move, but it's very resistant. Then I get the message "E1" Any advice would be welcome.

Posted by on


3 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Richard Taylor

  • 26 Answers

SOURCE: I have the Vision Fitness treadmilll #T9450. When

Take the front cover off and see if the drive belt is on the motor. Try running it to see if the motor turns. This could be a motor or controller board problem.

Posted on Jun 16, 2010



  • 8197 Answers

SOURCE: How to fold Vision Fitness treadmill T9000

Sorry this model Treadmill does not fold up. You can get the manuals on the link below.

Good Luck

Posted on Jan 05, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a vision fitness t9000 and i am getting a e 1 error code. it runs about 9 sec. and the code comes on and the belt stops

That sounds like a speed sensor. Make sure that the speed sensor is set properly and test it for continuity. If the sensor is set properly and functions then it's the motor controller, but that is unlikely. Also, if your model is over 9 years old and you've never replaced the walking belt then you should do that right away. If you don't you'll blow out your controller and then you're looking at a ~$700 repair.

Aug 27, 2017 | Vision Fitness Exercise & Fitness

2 Answers

I have it all set up..programmed a work starts to work..but the tread itself that you walk on wont run..what do I do?

From the User

'1.If the belt moves, but stops after a short time and
thedisplay shows "LS", run calibration. (on next page)
2.If you press start and the belt never moves, then
the display shows LS, contact service.

Sep 14, 2014 | Sole Fitness F63 Treadmill

1 Answer

I have a fitness Edge 491 Recumbent bike that the display window reads E1 . the resistance is hard and I am unable to reset. when I press start stop for 2 seconds it all looks like it will reset but then...

The bike is no longer sold and the company went bankrupt in 2014, so neither support nor parts are available from the company. Try the results of this Google search regarding the E1 error code:
fitness quest edge 491 e1 error Google Search

I’m happy to help further over the phone at

Nov 25, 2017 | Cycling

1 Answer

Motor not going on York Optimum 60100 - after a while E 1 appears

Dear Sir:
This is probably a 1) faulty speed sensor or 2)the speed sensor is not plugged in properly. Its also possibly a 3) faulty motor control board or lower board 4) Main motor faulty. . The error codes will differ between makes and models but could be e1.You must test

see my personal TIPS for diagnose and troubleshooting.

See if you can run the software calibration for diagnose and trouble.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a.

Mar 05, 2012 | York Exercise & Fitness

2 Answers

SOLE E95 "Ramp Error" Message

Thanks! It was the calibration!

But in order to get to calibration mode I had to press "Resistance Up" and "Start", not "Incline Up" and "Start"

Aug 07, 2011 | Exercise & Fitness

2 Answers

I have the Vision Fitness treadmilll #T9450. When

Take the front cover off and see if the drive belt is on the motor. Try running it to see if the motor turns. This could be a motor or controller board problem.

Jun 15, 2010 | Dmm Vision Fitness T9500 Treadmill

Not finding what you are looking for?
Vision Fitness T9550 Folding Treadmill Logo

Related Topics:

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vision Fitness Exercise & Fitness Experts


Level 3 Expert

2157 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30403 Answers

ray gallant

Level 3 Expert

66184 Answers

Are you a Vision Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides