How do i get stronger signal - Dynex DX-LCD37 TV

You change the channel in the router's wireless setting.
This does not give you a stronger signal BUT you can select a different channel so you do not get interference with other wireless routers in your area that are broadcasting on the same channel.

With the onset of more and more TVs being hooked up to cable, TV manufacturers didn't need to make the tuners as sensitive because the signal from the Cable Co. was much stronger than the over the air signal. If the other TVs are older they may be just sensitive enough to lock onto the channel signals. You could ask your cable provider to check your available signal in the house to see if there is the proper amount of signal. Some channels can inherently be stronger and when "block converted" (put where the cable company wants the channels) all come thru but some are a bit clearer.

If you used a same SIM card for those phones, I think its signal problem, when signal is low the connection will be disturbed sometime as no sound or cut suddenly during call conversation. Try to use different SIM card provider, with stronger signal will better, then put in these device. If the problem solved then its operator signal problem. The solution is change the SIM card.
But if you have try to change with other SIM card with stronger signal but people still can't hear you, then its microphone problem. You need to repair or replace your phone's microphone.

Hope this help and if this helpful RATE please.

U get some picture on some channel but very weak signal and fade out and get Error codes on the tv screen?Yes,than buy a stronger Digital antena design to get better and stronger longer recieving signal ranges.

im assuming its a cardbus adapter right? well that model is a wireless b signal, which isnt very strong, so any wireless g model should have a much stronger signal. it doesnt matter which one it is, as long as its wireless g, which most new cards are. hope this helps, goodluck

put up the high level things then you get it very stronger signal now you not get be'coz of the signal low strenght is not there so he can't caught the signal so pls change it in the high level

There are no stronger or weaker cards (if your's is a 802.11g, which it most probably is unless its VERY old) ...you can try changing the channel on your wireless router...

Netgear's web site has an excellent tutorial on how to do this. It involves turning off the DHCP on the Netgear, and linking the LAN prots of the two routers. There is no connection to the WAN port of the Netgear.

Here's the link http://kbserver.netgear.com/kb_web_files/n101236.asp

Carl

You are pushing your luck at 70ft. You can probably get booster ariels for your router that can boost the output signal for approx £10.

The digital signal is sent over UHF(13-69) channels (unless you are in Chicago which uses VHF( 1-12). You will have signal loss during rain. You can get a stronger antenna and put on a pole outside your home which will help keep the signal stronger.