If you have a removable drip pan get the kick plate off there and that pan should slide out the front. This machine is made by Whirlpool and I am thinking you maybe have a drip pan above the compressor. In that case yall would remove the rear dust cover and use a rag to clean out the pan as it is bolted down to the compressor. Model number don't show up on repair clinic or appliance parts pros.
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Unplug the refrigerator from the power source and remove the decorative vent cover at the bottom of the fridge under the door. Some vent covers are screwed on but many just snap onto clip that hold them in place.
Pull gently on the exposed front edge of the drip pan and ease it out towards you. The drip pan slides on runners on each side of the bottom of the refrigerator. It may be full of liquid or debris so go slow and steady and then discard it.
488 views
Usually answered in minutes!
×