At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Bucket full indicator light keeps coming on and the bucket is empty. I've reinserted the bucket many times thinking it's was inserted wrong but I still can't get it to work. The dehumidifier is brand new and only runs for a few seconds, then the bucket full indicator light comes on and it stops. What am I doing wrong? I have a Danby Premiere Model DDR30E.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
red lights on dehumidifiers almost always indicate a full water catch bucket , this does not allways mean it's actually full of water , the machine thinks it is , some thing has gone ary with the level sensor in bucket , these most times are a simple float switch, that can get knocked out of position when one is emptying the bucket , also this same float switch also allows machine to know there's a bucket in place to catch water , sometimes bucket is not in correct place to catch water so machine wont start
You have to be sure bucket is replaced exactly where it should go or the bucket will hold the switch in, thinking it is full. If you have a floor drain close by,remove the bucket and set the dehumidifier over or next to drain so water will go down it,then you don't worry about bucket getting full.If it doesn't run with bucket off, maybe defective switch. unhook wires to the bucket switch and hook or tape together,if dehumidifier runs then switch is bad. UNPLUG FROM OUTLET BEFORE DOING THIS. IF YOU DON'T UNDERSTAND ELECTRICITY GET QUALIFIED HELP!!
This
usually happens when either the Float Valve in the bucket is stuck in
the UP position (if yours is so equipped. Jiggle it to get it to return
to the DOWN position.
If you humidifier's bucket is not so
equipped. It's usually an indication that the bucket was not
reinstalled properly, after it was removed. To check and correct this,
turn the Master ON/OFF Switch to OFF and unplug the unit. Remove the
bucket and reinsert it, making sure that it fits "squarely" in the
bucket holder from Top to Bottom. Once installed, make sure the bottom
of the bucket is not tilted down in any way. Plug the unit back in and
turn the Master ON/OFF Switch to ON. If it was reinstalled correctly,
the bucket full light should have gone off and the unit will run as it
should, if the humidity extraction level is set low enough.
Hope this helped you to troubleshoot and solve the problem.
Take out the bucket and locate the bucket full switch inside the cabinet. Depress the switch and see if it comes on. If so, you may have to add a shim to the bucket or strap it in with a bungie cord as the bucket is jiggling and makes the unit think that it has been removed.
×