Maytag Atlantis MAV6000 Top Load Washer Logo

Related Topics:

Posted on Apr 20, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

The machine will not go into spin mode - Maytag Atlantis MAV6000 Top Load Washer

Answer This Question

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Maytag Master 43,501 Answers
  • Posted on Apr 20, 2011
Anonymous
Maytag Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: Nov 12, 2009
Answers
43501
Questions
0
Helped
10842730
Points
101584

Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My beko wmb61431s will work in spin or rinse mode
check the clutch, the belt, the motor coupler, the door switch,
Read full answer
Feb 25, 2015 • Beko Washing Machines
1helpful
1answer

The machine will not spin only without doing a wash. How to fix that???
Most machines will do a spin mode even though it does not state it you have to set to a final rinse and spin mode.

good luck
Read full answer
Feb 25, 2015 • Washing Machines
1helpful
1answer

Hitachi sf-95kj washing machine stop and shown error code c4 when it's go to spin mode
A lot of new machines need the hoses cleaned out. The slime up. The pump gets shut down and the unit won't spin. Unplug unit before you service it to avoid shock. Top has to come off, and front also.
Read full answer
Nov 16, 2013 • Washing Machines
0helpful
1answer

Have kenmore heavy duty 80 series about 15 years old. It will not go into spinning mode after washing mode or rinse mode as it is supposed to.. By fooling with the controls I can eventually get it to...
Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101
Read full answer
Aug 27, 2010 • Kenmore Washing Machines
0helpful
1answer

Machine spins in agitate mode
The problem is the timer has failed. This is easy to replace. There is a video at www.appliancehelponline.com/servicemanual.html that will walk you thru the replacement. You can also enter in your model # for diagrams and illustrations. All parts come with installation instructions.
Read full answer
May 03, 2010 • Amana LW8203
1helpful
2answers

I have a Maytag Neptune TL. The machine is working normally except it's not able to fully extract the water out of the clothes. When the full cycle is complete the clothes are still dripping wet. I have a...
We are talking about FAV6800A or FAV9800A TL correct?
If so you need these links the Service Manual and parts look up; here is the Service Manual for reference. Sears Parts Direct for reference.
If your machine completes the wash cycle with no error code such as ND (No Drain) and there is no visible water in the bottom of the wash basket when you remove your wash load then I would do this test.
Take the next wet wash load that is dripping wet and lets do a Quick Spin Test in Service Mode. During this test test the FAV6800A LED display model will step thru the RPM (revolutions per minute) or goal is to ensure the machine will spin the wash basket up through all Spin Cycle RPM ranges. Any RPM range above 99RPM’s will be shown with a (.) dot after the two numbers displayed i.e. 350RPM will show as 35. 550RPM will shoe 55. And so on.
I’m and owner of the FAV6800A and I’m not sure what the LCD display of the FAV9800A will display.
Enter into Service Mode;
Page 14 of the Service Manual; below I have cut and paste the instructions.

Enter / Exit Service Mode
To enter Service Mode press the Enviro Plus and Spin Only keys (simultaneously) for three seconds or until the control beeps.
Now go to page 14 and enter this front panel key pad press to start a Quick Spin Test and see if the machine with that wet clothes load will spin the wash basket to 850RPM.
Quick Spin Test
While in Service Mode, press the Hand Wash
key to start a Quick Spin Test.
Quick Spin test steps are as follows:
1) Lock the lid.
2) Spin to index speed 90 rpm and hold for 60
seconds. Pump drains machine.
3) Spin to index speed 150 rpm and hold for 6
seconds.
4) Spin to index speed 350 rpm and hold for 6 seconds.
5) Spin to index speed 550 rpm and hold for 6 seconds.
6) Spin to index speed 700 rpm and hold for 6 seconds.
7) Spin to index speed 850 rpm and hold for 6 seconds.
Pump out.
8) Coast down to 0 rpm chimes 3 times.

Hit the Off button to get out of service mode.

If the machine spins the wash basket to 850 RPM then we need to start looking further. What are your results?

You can check the flow rate of the drain system by again entering Service Mode and turn the Drain Pump on in service mode. I would (hand fill) place 5 gallons of water in the machine and turn on the drain pump see page 16 for Board Output Test.

Enter Service Mode and press the Delicates key. You are now in Board Output Test now press the Presoak key and the Drain Pump will turn on. If your machine pumps out the 5 gallons of water in 60 seconds or less I would say your Sump Cap, drain line connection from Sump Cap to input to the Drain Pump, Drain Pump and discharge line are all working as designed. If the Machine takes greater then 60 seconds to dump the water then you need to start troubleshooting for a drain line restriction or Drain Pump issue…...Rich
Read full answer
Apr 05, 2010 • Maytag Neptune FAV6800AW Top Load Washer
1helpful
2answers

Maytag neptune in spin cycle goes slowly fav6800aww
Hello smithe623

I’m an owner of the machine.

I assume the machine is not displaying and error code to the LED Display?

I would download the Service Manual and go to page 14 and perform the Quick Spin Test in Service Mode.

Enter the Service Mode by pressing and holding the Enviro Plus and Spin Only keys for three seconds or the display reads “00”
The Quick Spin Test will spin the wash basket up thru all RPM ranges starting at 90 RPM .15 =150 RPM, .35 = 350 RPM all the way up to .85 for 850 RPM. Report back on the results of the Quick Spin Test and we will go from there.

You can get out of Service Mode by pressing and holding the Enviro Plus and Spin Only keys for three seconds or press the off button on the console.

Take care…..Rich
Read full answer
Nov 26, 2009 • Maytag Neptune FAV6800AW Top Load Washer
0helpful
2answers

Washing machine wont go into full spin
was advised could be bushes so replased them works a treat thanks
Read full answer
Feb 07, 2009 • Hoover Washing Machines
0helpful
1answer

Washer did not turn to spinning mode
could be a lid switch problem.

if the lid switch is not making contact, the machine is thinking that the lid is open and would not run the spin cycle.

tnx 4 using fixya,

drcool
Read full answer
Aug 14, 2008 • Kenmore 23822 Top Load Washer
Not finding what you are looking for?

View Most Popular

Atlantis MAV6000 Top Load Washer

  • Washing Machines

Related Question

My beko wmb61431s will work in spin or rinse mode

  • Beko Washing Machines

Related Topics

70 views

Ask a Question

Usually answered in minutes!

Popular Questions

Washer leaking water from bottom

Maytag Atlantis MAV6000 Top Load...

Maytag Neptune Error COde "nd"

Maytag Neptune MAH9700 Front Load...

Want to disengage lid lock on maytag centennial

Maytag Centennial 3.2 cu. ft....

Maytag 2000 series shows error code f6 e1. How can I fix?

Maytag MHWE200XW Washer

Maytag maxima codes F06 and E02: Tried doing a spin/rinse/drain on an empty machine. Timer seems tpo be working but cannot hear water filling or barell spin. tried to shut off and door is now locked.

Maytag Maxima EcoConserve Series...

Top Maytag Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...