LE CODE WHAT MEANS. DAEWOO WASHING MACHINES MODEL: DWF-772W

See troubleshooting section of user manual. It will help.

Trouble Shooting - Daewoo DWF-260C Instruction Manual [Page 15] ' ManualsLib

Here is Service Manual for further help
Trouble Shooting Guide; Concerning Water Supply - Daewoo DWF-200P Service Manual [Page 22] ' ManualsLib

Daewoo Washing Machine Error Fault Code = E9
Fault Detected: Pressure Sensor Error
Washer Has Detected: Error with the pressure switch or level sensor
Check / Repair / Fix = Wiring to level sensor - Level sensor

Daewoo Washing Machine Error Fault Codes

https://removeandreplace.com > 2015/11/02 > daewoo-...

Nov. 2, 2015 - The Daewoo generalized error fault codes below are to give you an "idea" as to what part is at fault. ... Daewoo Washing Machine Error Fault Code = E9 ... If your Daewoo Washing Machine Error Code is not listed here, check ... Mine is Daewoo washing machine DWF-8288, showing E1 and won't spin and ...

..

my Daedwoo DWF-806 MP machine when i swith on shows figure 49 and not figure 0, and it also making noise like Buzz in between when the machine is ON. Can anybody help me to resolve this defect
thanks

DWF-200MS I have a DAEWOO DWF-200MS top loader washing machine and when I switch it on I get an error code E9. Can you please tell me the fault and how to repair it?

daewoo washing maching model dwf-760mp nano silver, when i press start water comming out continously

I have a daewoo top loader washing machine ,,

Mode W/M-DWF-200MP

The power main board does not take the programs to work how should be its olny one program

In other Daewoo models LE error code means pressure sensor failure. This sensor is used to know water level in the tube. It is probable that your model reports the same codes.
It does not necessary means a broken sensor you must check the electrical connectors and cables as well as all the mechanic and pneumatic elements like the hose connected to the sensor.
It is often clogs with soap and other particles.

Good Luck!

check suis door

I HAVE DAEWOO WASHING MACHINE MODEL DWF-6010AP
THE PROBLEM IS THAT COLD INLET IS LEAKING WHEN RUNNING I NEEDS SOLUTION OR WHERE CAN I GET PARTS