Resource/ffs/mainapp_layouts.rc!20 is missing ! Idle Screen is not displayed correctly. that is showing up on my phone and i have no idea how to fix it:/

https://www.thisoldhouse.com/bathrooms/21267912/small-bathroom-layout-ideas
https://www.thisoldhouse.com/bathrooms/21018655/23-savvy-and-inspiring-small-bath-designs
https://www.homesandgardens.com/spaces/decorating/small-bathroom-ideas-208152
https://www.houzz.com/photos/small-bathroom-ideas-and-designs-phbr1-bp~t_712~a_30-231
https://www.sunrisespecialty.com/small-bathroom-layout
https://modernize.com/homeowner-resources/bathroom/small-bathroom-layout-ideas
This should give some ideas. Home Depot might also have such. And a search for images of small bathrooms might offer links to pages of interest.

Perhap did you set on the do not disturb feature
follow this guide

1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
   These instructions only apply to Standard mode and the default Home screen layout.
2. Navigate: Settings > Sounds and vibration.
3. Tap Do not disturb.
4. Tap the Turn on now switch to turn on or off .
5. Tap Turn on as scheduled to turn on or off.
   • If on, perform the following:
     1. Select the preferred day(s).
     2. Tap Start time and adjust the start time then tap DONE.
     3. Tap End time and adjust the end time then tap DONE.
     4. Tap the left Arrow icon < (upper-left) to return to the previous screen.
6. Tap Allow exceptions.
7. Select one of the following:
   • No exceptions
   • Alarms only
   • Custom
     If selected, configure remaining settings as desired.
8. Tap the left Arrow icon < (upper-left) to return to the previous screen.
9. Tap Hide visual notifications then tap to turn on or off either of the following:
   • Show when screen is on
   • Show when screen is off

Search Results

How To Fix Your RC Helicopter - YouTube

? 4:22
https://www.youtube.com/watch?v=R65JJYwSH50
Jun 28, 2010 - Uploaded by R/C 101
Does your RC helicopter spin out of control in the air or ... thing that the video says but there nothing wrong about it the remote is fine but the propeller .... i have a brookstone RC stunt copter that i have not used in a few months. i .... however when I come to fly it, it makes a sound but the wings aren't working.

All comments on How To Fix Your RC Helicopter - YouTube

https://www.youtube.com/all_comments?v=R65JJYwSH50
where can I buy new gears and pinions for my mini rc helicopter?. Read more Show.... The two pins on the charger port aren't working they won't charge ..... The charging light is off meaning the battery is charged. Any ideas? ..... So, the motor spins the correct way but there is no gear to transfer the power to the rotors 'A'.Missing: silver ‎bullet

rc helicopter light flashing Remote Controls Questions

i fogot my code c160

Ok, solved this problem by visiting roland U.S. site as the help offered in this country is useless. The instructions given by email would not have worked even after the update was installed. Luckily, there are instructions that come with the download. If you have same problem as me go to http://www.rolandus.com/products/productdetails.php?ProductId=772&tab=downloads&skip=true

and update the opperating system on the RC-50 to RC-50 System Update Version 1.01.

Then hold loop sync and phrase 2 button (think it was phrase 2) to change it to sound priority mode. Then it will play back correctly what you recorded on the first loop, rather than missing the first beat.

Am v.happy I have found this, as after much searching I can't find any other loopers out there that offer 3 seperate loop tracks and the ability to switch between them effectively. Plus, it's a very convenient size, better than a load of rackmounted stuff to haul around.

However.....

Another problem..

When hitting the reverse switch ( I assigned both external footswitch and the onboard Tempo pedal to reverse) the change is not instanteaneous. There is a second or so delay before it plays in reverse. Not a problem for most, I suppose, but I have a piece that switches rythmicaly between playing forward and reverse which means hitting a pedal in time and reverse/forwards changing immediately. I think they could do with another software update to solve this. Now I have to keep room in my enormous pedal board for the old rc-20, as that does the reverse as it should - when you hit the flippin switch!

I had the same problem. Turn off the phone, take out the battery for 20 or 30 seconds and put it back in. Fixed my phone like a charm.

you have a problem with your keypad.

This could be an issue with your Video drivers. I would try and Download the newest drivers for my system and see if that helps the problem

go to main menu then to settings push ok push ok on display/info
push ok on wallpaper can you see it now

yes i have the same phone and repair tonnes too.

clear the numbers on the phone, not the sim. now restart the phone switch off take battery out and push the red power button. now replace the battery and switch on. copy all the sim numbers onto the phones memory and backup the numbers onto a computer (a mobile phone store will do this for $25 (ish) )

now clear the sims numbers. so now all your numbers are on the phone only. this will solve the incorrect numbers which the phone reads off the sim incorrectly.

also good idea to clear the calls incoming, outgoing, missed, received.. by deleting them, as the D500 sometimes gets these confused as they are stored in the same place and under the same file headings.

this should fix the problem. also it a good idea, if the phone or sim is old...   is to get a new sim.. just get the number and so on to be transfered across.

or.... (please backup pics, vids, numbers everything!!!) try:

*2767*3855#
or
*2767*2878#
or
*2767*3855#

good luck.