I have a westinghouse tv model ltv -19w6, buy I don't have a remote control, I'am trying to set a universal control, buy I don't have de code for this model. can you give me the code please.

Be sure to manually turn on the device you wish to control. Press. And hold the setup button until the red indicator light remains on and then release the button. Press.

The system control section circuit fault. Contact any service technician.
Make sure about the working of the remote control first. Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site in "Mosaic" or "Magazine" view. It will make surf easier.
http://electronicshelponline.blogspot.com/
If the remote control is found OK, the TV need through checkup.

Did you try turning the tv on with the buttons on the tv?
[email protected]

Hello Sarheejackso, I don't have the direct code but I can tell you that this model uses SONY remote codes.

You can try code 0463, although its a long shot.

Alternativley....this may work (a manual code search):

Turn on the device that you want to control. (TV)
Then press that device key on your remote once and release (the TV key as an example).
Press device key a second time and hold for at least 3 seconds, and release.

Hopefully, the device key is now flashing. Next, start pressing channel up repeatedly until the device you are trying to control turns off. When this happens, press the device key, this will lock in the code.

Note: When the device shuts off, you may have hit channel up before your brain realizes what happened (i.e. you will be one code off...so hit channel down and then the device key if you think you went to far)

Hope this helps!

Universal remotes are cheaper,but those codes u enter for any tvs any models might work might not.No,not any univeral remotes have any particular tvs brands,just a list of a universal codes for the tvs brands it covers.Try website like Remotes.com to buy a remote same as ur original remote.Than u don't care about codes or taking chances of those codes,will or will not work for ur tv.

Hi,

Westinghouse don't actually make TVs, they are just 'badged'. Westinghouse is part of the Electrolux group, so the obvious answer would be another Electrolux company that DO make TVs. The only one I can find is Philco, however I happen to know that some or all Philco units are made by Funai Corp. of China. The following are all TV brands made by Funai:

Funai
Magnavox
Symphonic
Sylvania
Superscan
Element
Philco
Durabrand
Trutech
Emerson
ESA

Try Philco codes first (if there are any) then work through the above list. It's likely that your TV is made by Funai and has the same components as one of the above brands. Please note that not all universal remotes will work with all TVs and universal remotes often don't work when the TV is newer than the remote.

Hope this helps!

Regards,
BElectric

If a generic brand remote doesn't list "Westinghouse," you're going to have to order a factory original. Went to Comcast site, scrolled down, and it said Westinghouse is........0463

www.urc.philips.com

An email from Westinghouse that fixed the problem for me.

Thank you for your inquiry.

We apologize for any inconvenience in waiting for our response, but below is what I can suggest to move forward.

It appears all you need to do is run a channel scan on the unit. Once you have run a channel scan, you will be able to scroll through the channels using the channel up and down buttons.

If you have any further questions, you may contact us through email, or by calling us toll-free at 1-866-287-5555, between 9am and 9pm Eastern Standard Time, Monday through Saturday. One of our technicians will
assist you.