Lost the operating instructions for W1712 washing machine

Try turning the spin speed up if you can the pump could be dodgy try on a different cycle

its not worth replacing control board just buy another machine

Perhaps this will help:

http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3629-bush-washing-machine-error-codes


Manual BUSH HW60 1460D WASHING MACHINE Operating Instructions Service

..

Hi dear,
Your machine does not have a replaceable fuse. If you are in AUS P/N:7790772 - Power-/Control unit EDPL 200-KD220-240Vse. I can advise to check part number with Miele, providing your machines serial number. I hope that helps. Thanks.

Hi dear,
There is a internal leak on your machine. You need to contact Miele to assist you. Thanks.

The F63 is an error when something is blocking in the water path. I would suggest to open the front access drain flap and check for any objects like pins, coins etc. remove them and this should clear the error.

I am seventy five and I do not want to join a site with a silly name like FixYa. All you have done so far is to send me on a wild circular search for a very simple request. I want the site where I can download the operating instructions for the above washing machine. That is not asking too much surely?
Jill Briggs

Check out this website.
www.theusermanualsite.com

this should just unscrew anti-clockwise. it is probably just tight

Just had the same problem, after Much patience and persistence I found the blockage at the y piece that joins the pump to the outlet hose air trap towards the top of the machine LHS with the top and cover off.

It was clogged solid therefore no back pressure on the top little ball valve (between the air trap and the outlet) therefore no seal therefore norain therefore a drain-fault that persists regardless of a cleaned pump filter.