Hello im getting a startup error when i press the quickstart button on my 95ti treadmill.

For Ray:
Life fitness 95ti treadmill

Diagnostics Charting
https://www.gympart.com/TSB/LifeFitness/Treadmills/97Ti_TTN100000/D/Diagnostic%20Mode%20Entry%20and%20Functions.pdf

..

Hi There,

Give this a try....go to Sportsmith.net and/or google Service Menu Life Fitness 95Ti. Once in the service menu, there should be an entry for the user to select Miles or Km.
It mentions pressing/holding the Pause Button until the Service menu appears on the display. Good Luck!

see this steps and fix it. .Of course you must read your instr. manual or download from www. iconservice.com
When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

2 Press the "ENTER" button three times to access the treadmill's error log.

3 Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.

4 To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.

5 To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.

Dear Sir:

I will try to help you.

• 1

When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

• 2

Press the "ENTER" button three times to access the treadmill's error log.

• 3

Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.

• 4

To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.

• 5

To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted

If you need further assistance, please reach me, sincerely.

God bless you.

E.CUADRA
MANAGUA, NICARAGUA. C.A.

Dear Sir:

Please try with this Reset system for Code:

• 1

When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

• 2

Press the "ENTER" button three times to access the treadmill's error log.

• 3

Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.

• 4

To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.

• 5

To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.

If you need further assistance, please reach me. sincerely. God bless you.

E.CUADRA

MANAGUA, NICARAGUA. C.A.

Matrix Treadmill, (T5x, T7x) Control Board, Motor, 1.5KW/90~264V, JHT01

From time to time, error codes will pop up on your treadmill. It just takes a quick second to clear the error log and get the treadmill up and running again.
1.When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.
2.Press the "ENTER" button three times to access the treadmill's error log.
3.Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.
4.To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.
5.To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.
I hope you find it very helpful.

I have seen this a couple of times. The incline motor probably has a gear problem. Remove hood and find the plug for the incline motor, disconnect and then reset treadmill. treadmill should work but will not incline until incline motor is repaired or replaced. Good luck.

If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Fitness Repair Parts. About $400.00