My dsc-t10 camera shows e:62:10 - Sony Cyber-shot DSC-T10 Digital Camera

Hello,

Yes, the backlight is a separate part. It can be removed from the LCD and replaced.
The following video shows how to replace the backlight in a Sony camera.

http://www.desmontalo.com/?p=275

Check in this links...

- Charger -->> Battery-Charger-Cybershot-DSC-T10/dp/B000NOXCLM
- Battery -->> Sony-InfoLithium-Rechargeable-Battery-Digital/dp/B0001AU7SY

Hope this helps.

1. Turn OFF camera
2. Remove the battery or the power supply
3. Turn the switch to CAMERA for about 30 sec
4. Turn the switch to OFF
5. Install the battery or power supply
6. Turn the switch to MEMORY
7. Open the LCD cover and press the RESET button ( small inner button )
8. You will be prompt to adjust date/time. Do it
9. Your problem should be solved

You can buy it online: http://www.ownta.com/sony-dsc-t9-t10-digital-camera-repairing-lcd-screen-for-replacement.html

Fix by yourself with opening tool.

Yes you can.
See link below!
http://www.ehow.com/how_2066824_use-digital-camera-as-webcam.html

Just use the audio/video cable that came with the camera to connect to you pc.

It still should take a picture squeeze the camera very hard and watch the LCD, that usually takes care of it.

Since this is now some twelve years old, it has probably reached the end of its working life.

Hi there, I now have two Cybershot DSC-T10 with broken LCD's. The best remedy that I have found is buy a parts camera with a good LCD on EBAY. You can get the whole camera for way cheaper than you can buy a new LCD.

Hello, I have same problem with dsc-t10, when I open my camera than I found 3 motors, two of them on the right of the lens, these are to adjust the focus. One of them was broken.

Hello, this error message means that there is an melfunction in angular velocity sensor, peripheral cicuits. Simply speaking steady shot function does not work well. Please contact nearest Sony Dealer. Best regards, Arpi