How to enter codes on remote control - RCA RCR311B Remote Control

1. Identify the brand and model of your television: Look for the brand name and model number of your television. This information is usually located on the back or side of the TV itself. Knowing the brand and model will help you find the correct remote control codes for programming.
2. Search for remote control codes: Most remote controls come with a set of codes for various television brands. Without the manual, you can try searching for the remote control codes online. Many websites and databases provide lists of codes for different TV brands.
3. Entering the codes manually: Once you find the code for your TV brand, follow these steps to enter it into the remote control:a. Turn on your television. b. Press and hold the "Setup" or "Code Search" button on the remote until the indicator light turns on. c. Enter the code for your TV brand using the remote's number buttons. The indicator light should turn off if the code is entered correctly.
4. Test the remote: After entering the code, try using the remote to control your television. Test functions like power on/off, volume, and channel buttons to see if they work correctly. If they do, the remote control is successfully linked to your television.

If you don't have success with the first code you find, try other codes for your TV brand. Sometimes, multiple codes are available, and you may need to try several before finding the correct one.
If the above steps don't work, it's possible that your remote control uses a different method for programming. In that case, try searching for the specific programming instructions for your remote control model online. Manufacturers often have manuals and programming guides available on their websites.
If all else fails, consider contacting the manufacturer of the remote control for assistance or purchasing a universal remote that can automatically search for the correct code for your television.

If you have a new remote control for your television and you don't have the manual, don't worry. You can still try to link or program the remote to your television by following these general steps:

1. Identify the brand and model of your television: Look for the brand name and model number of your television. This information is usually located on the back or side of the TV itself. Knowing the brand and model will help you find the correct remote control codes for programming.
2. Search for remote control codes: Most remote controls come with a set of codes for various television brands. Without the manual, you can try searching for the remote control codes online. Many websites and databases provide lists of codes for different TV brands.
3. Entering the codes manually: Once you find the code for your TV brand, follow these steps to enter it into the remote control:a. Turn on your television. b. Press and hold the "Setup" or "Code Search" button on the remote until the indicator light turns on. c. Enter the code for your TV brand using the remote's number buttons. The indicator light should turn off if the code is entered correctly.
4. Test the remote: After entering the code, try using the remote to control your television. Test functions like power on/off, volume, and channel buttons to see if they work correctly. If they do, the remote control is successfully linked to your television.

If you don't have success with the first code you find, try other codes for your TV brand. Sometimes, multiple codes are available, and you may need to try several before finding the correct one.
If the above steps don't work, it's possible that your remote control uses a different method for programming. In that case, try searching for the specific programming instructions for your remote control model online. Manufacturers often have manuals and programming guides available on their websites.

To program your Bose CineMate home theater system with the Spectrum remote, you will need to use the appropriate remote control codes. These rules vary depending on the model of your Spectrum remote and the specific model of Bose CineMate you have. Follow these detailed steps to program your Spectrum remote to control your Bose CineMate: Find the remote control code: First, you need to find the remote control code for your Bose CineMate system. Spectrum provides a list of remote control codes for devices on their website or in the remote control user manual. You can also try looking up specific codes online using the model number of your Spectrum remote and Bose CineMate. Turn on Bose CineMate: Ensure that your Bose CineMate system is turned on and in the proper mode for operation (e.g., TV or AUX mode). Enter programming mode: Press and hold the "Setup" button on your Spectrum remote until the LED indicator on the top of the remote turns on. Enter Code: Use the number buttons on the remote to enter the four-digit remote control code of your Bose CineMate. The LED indicator blinks to confirm the entered code. Test control: After entering the code, point the Spectrum remote at the Bose CineMate system and press various buttons (e.g., volume up/down, power) to see if it controls your Bose system. If it works, the program succeeds. Save the code: When the remote control works with your Bose CineMate, press the "Setup" button again to exit the programming mode. Now that the code is saved, your Spectrum remote should be able to control your Bose CineMate. Please note that not all remote control codes may work with all models of the Bose CineMate. If you can't find a working code, you can try the code search feature in your Spec

How to program a Samsung AK59-00104K remote control

How to program a Samsung AK59-00104K remote with codes:

1. Turn on the TV.
2. Point the remote at the TV.
3. Hold the "TV POWER" button while entering a two digit code.
4. Release the "TV POWER" button.

If you enter the correct two numbers, the TV should switch off.
TIP: Start entering the remote codes at 00, then 01, then 02, then 03, etc...
TIP: Once you find the correct code, write it down somewhere you can find it next year!


Codes:

Remote Control Codes

Here ya go. Heres some brief instructions and a link to sony for the codes and full instructions
Follow these steps to program the remote control.

1. Turn on the component to be programmed.
2. On the remote control, press and hold the SET button until the SET indicator lights up.
3. Press the appropriate component select button for the component being set up.
4. Using the number pad, enter the component's manufacturer code.
NOTE: If more than one code number is listed for the manufacturer, repeat the procedure, entering one code at a time until you find one that works.

5. Press the ENTER button.
6. Point the remote control at the component and press the POWER button.

NOTES:

• If none of the codes listed for the manufacturer work, it may be necessary to try codes listed for other manufacturers or perform a search for the correct code. Consult the Operating Instructions provided with the remote control for steps on searching for the correct code.
• If a new code number is entered, the code number previously entered will be erased.
• When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
• The operation of a combination deck of any kind is not guaranteed.
• Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
• In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.
• If programming fails, it may be necessary to reset the remote control. To reset the remote control, remove the batteries and press each button on the remote control twice.

go here for more information http://esupport.sony.com/US/perl/model-remote.pl?mdl=RMV210

How to Program the RMT-B107A Remote Control:
Follow these steps to program the remote control to operate a television.
1) Turn on the TV.
2) On the remote control, press and hold the TV I/O button.
3) While holding the TV I/O button, enter the manufacturer's code using the numeric buttons.
NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
4) Release the TV I/O button.
5) Point the remote control at the TV.
6) Press the TV I/O button to verify operation.
NOTES:
If a new code number is entered, the code number previously entered will be erased.
When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
The operation of a combination deck of any kind is not guaranteed.
Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.
************************************************************

Here are all the codes for your Denon DVD player.


30490, 30634, 31634


Just in case you don't have the manual I also included the steps to input the codes.
Hope this helps

Follow these steps to program the remote control.
NOTE: Even though the FUNCTION buttons are labeled for specific components, they can be programmed to operate any type of equipment that is compatible with this remote control. For example, the BD/DVD function can be programmed to operate a VCR, AV receiver, etc.

1. Turn on the component to be programmed.
2. On the remote control, press and hold the INPUT button.
3. While holding INPUT button, press the FUNCTION button for the desired component.
4. Release both buttons.
NOTE: The FUNCTION button will blink for approximately 30 seconds or until a code is entered.

5. Using the number pad, enter the component's manufacturer code.
NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.

6. Press the ENT button.
NOTE: The FUNCTION will blink twice if the programming is successful, if not, it will blink five times.

7. Point the remote control at the component.
8. Press the component POWER button to verify operation.

NOTES:

• If a new code number is entered, the code number previously entered will be erased.
• When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
• Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
• In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, use the remote control that was provided with the equipment or purchase a universal remote control that has a learning function.
• If programming fails, it may be necessary to reset the remote control. To reset the remote control, remove the batteries and press each button on the remote control twice.

try the following codes until one of them work:

002, 003, 004, 005, 006, 007, 008, 044, 045, 046, 053

Follow these steps to program the remote control.

1. Turn on the component to be programmed.
2. On the remote control, press the SET button.
3. Press the appropriate component button for the component being set up.
4. Using the number pad, enter the component's manufacturer code.
NOTE: If more than one code number is listed for the manufacturer, repeat the procedure, entering one code at a time until you find one that works.

5. Press the ENT button.
6. Point the remote control at the component.
7. Press the POWER button to verify operation.

NOTES:

• If a new code number is entered, the code number previously entered will be erased.
• When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
• The operation of a combination deck of any kind is not guaranteed.
• Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
• If none of the codes listed for the manufacturer work, it may be necessary to try codes listed for other manufacturers or perform a search for the correct code. Consult the Operating Instructions provided with the remote control for steps on searching for the correct code.
• In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.