Washing Machines Logo

Related Topics:

Anonymous Posted on May 18, 2011

Bosch Nexxt 300 has error code E-13 and the door is locked. turned on/off, unplugged, removed the drain hose to see if it is blocked, but ok. but still won't unlock. Is there someway to unlock the door?

1 Answer

Raj

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Welcome Back:

Visited the website for 2 consecutive days.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 3 Answers
  • Posted on May 18, 2011
Raj
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Welcome Back:

Visited the website for 2 consecutive days.

Problem Solver:

An expert who has answered 5 questions.

Joined: May 17, 2011
Answers
3
Questions
3
Helped
1571
Points
12

Turn the dial to off position wait few second, door should unlock. Unless you try to open it during cycle, it won't open. Otherwise, follow owner manual. call the manufacture.

  • Anonymous Jun 29, 2011

    This worked for me and saved me the $69+ service call. I found that there is a small plastic piece hanging down inside of the cover that will allow the door to open. Mine was stuck shut and full of water and clothes. Opening the door allowed me to get the wet clothing out and then was able to **** the water out of the drum faster. I found several bobby pins and hair ties stuck in the impeller. Upon removal, it works just fine.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

When door locks ..the drain pump runs. As water enters it is drained instantly. No water in drum,drain passage clear. Unplugged the pressure sensor..still DOES IT Bosch Nexxt 300 WFMC2201UC/13

Possible that the drain pump is running due to a small leak is present at the base of the machine, providing this has a metal cover on it ,it gets water in here which activates afloat switch switching on the pump hence draining the machine to avoid possible flooding, if the pump does not appear to be running then the drain hose is too low resulting in syphon effect,in which case raise it...Good luck
0helpful
1answer

Is there a way to reset the computer my bosch 300 nexxt series washer?

turn off THE POWER by c. breaker, wait by 45 seconds, and turn ON again and try it.
God bless you
0helpful
3answers

My Bosch Nexxt 300 has E13 code, I'v cleaned the bottom drain, cleaned the outlet hose, ran 1 gallon of cold water threw on the Regular/Cotton cold water cycle, unplugged it for several minutes, t

please download the user manual from the manufactures website its normally free and look at the trouble shooting guide for help on the subject eric
0helpful
1answer

What is the p:01 code on the Bosch 300

Possible this could be jammed lock and is advisable to check the lock settings.
Please check this link for tips.:
Door lock
0helpful
1answer

Im getting an error e 13 message and the door will not unlock

error code = bad pump? or just a clogged screen /kinked drain hose?
E:13Er:13 test #P:15Drain pump time exceeded,Faulty drain pump, wire harness, hose

0helpful
1answer

Hello! My Bosch Nexxt series 300 washing machine is showing a E: 13 error and won't open. I have tried unplugging it but that doesn't seem to help.

e 13 is a door lock error if you are lucky you may have a manual release check where filter is for a red pull release this mechanically activates the door to retrieve trapped washing,if not lock will need replacing engineer visit unfortunately.
26helpful
1answer

Bosch Error Code 13 Washer won't drain

First, unplug your washer. After that find the little round plate below your drum opening on the exterior of the washer. It should have a small hole in it. Use something to gently push trough this hole and twist the cover off, Inside there you will find the drain access. Be careful, if there is water in your drum this will make a mess when you unscrew the drain access. Take the usual precautions and unscrew the drain access slowly until it is off. Remove any obstructions and replace access door and cover. Clean up any mess and plug back in your washer and try again. takes about thirty minutes to an hour depending on how much water is in the drum.
0helpful
1answer

My brand new Bosch is not draining and is showing E:13 error code

Put the washer on cold and run "TWO" cycles. There is too much soap or fabric softner.

5helpful
1answer

Code E13

For a Bosch washing machine, Error 13 is pumping time exceeded. So, in general, the issue is pump related. Things to check would be if the pump is blocked (it can be cleaned out if you can get the service door in the front panel off), check the wiring connections to the pump, and check the drain hose to make sure it is not blocked.
Not finding what you are looking for?

1,234 views

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...