My W3503 Emachine will not let me down load an ATT air card , I get the message -window installer service could not be accessed this can occur if you are running windows in safe mode ,or if the window installer is not correctly installed . contact your support personel for assistance

hello step:1 enter to this web site www.ma-config.com step 2 : make like in this video http://www.youtube.com/watch?v=9ySs9HIvNkI or http://www.youtube.com/watch?v=rf31_dG0_9k

Hello sortugado, If your sound is dead, This could mean that you've plugged it into the wrong socket. This could be wrong. But try this.
Start - Control Panel - System - Hardware - Device Manager - Right Click on the Sound/Audio (it should have a yellow sign next to it) Then go Find Manually and go down the List, Press Sound & Hardware, What ever brand your computer is, there should be sound that is the brand name as the same computer brand you have. Once that's found, Click it. It should then install your hardware sound. If this problem still doesn't work, You can simply go on ebay and buy a $5 Sound card. These do work, I am using one now, and let me tell you, it's absolutely great! So cheap great quality, and fast shipment. I hope you get your sound to work :)
- Steven ASAP
Here to help!

hi try to upgrade some ddr

The amber power light indicates that your computer has been "sleeping" or "hibernating" and usually all it takes to restart the computer is tapping a key on the keyboard. If this is not the case, try holding the Power switch down for 6-10 seconds to force the system off. Restart in Safe Mode and try to find the settings for Sleep/hibernate, open the control panel and open the Screen Saver. Select "Change Power Settings" and set it for "Never" on sleep and hybernate.

The term: SM Bus is the same as chipset driver. Your e-Machine came with restore CD's. You can run the restore CD to repair your system, you shouldn't loose any data repairing windows.
If your able to load windows, load the driver CD from e-Machine and re-install the chipset drivers.

Cheers!
Mike

I have owned several tablet PC's and all of them (including my most recent Toshiba) worked just fine with the existing wi-fi card. Please be clear, however, that AT&T wireless air card service and "wi-fi" are two different things.
Your AT&T card pulls internet service over cellular connections, and your wi-fi card connects to a local hot spot (if available) or your own wireless internet access.
First of all, be sure that you have an active AT&T laptop connect account and then follow these steps:
Power on your laptop. Insert the AT&T wireless air card into an available USB slot. Wait a few moments (this may take several minutes some times), and the card will typically start attempting to install itself and its software. If you have any trouble with this, ATT provides free installation tech-support at the following site:
http://www.wireless.att.com/businesscenter/solutions/wireless-laptop/modem-cards.jsp

You may also have them contact you at your convenience by going to this page and filling out the form:
https://www.wireless.att.com/businesscenter/b2b/contact_us.jsp?wtLinkName=ContactATT&wtLinkLoc=RN

Hope this helps!
Jeff

You can call Mirosoft at 1-800-642-7676 they can help you with this problem.

Is you windows at automatic update enable, Ok try this on the RUN dialog box type SERVICES.MSC and press enter and see your automatic update should be AUTOMATIC under the start up type. Doubleclick on automatic update to do changes to the settings and see what happens. cheers

Apears that your installer CD has got corrupt. Try installing from a fresh copy of Windows 98 (preferably Windows 98 Second Edition).

Pull the bios battery for 15 sec. Re-install windows.