Need win7 driver for tasco digital trail camera

I think the manual at the link will give you the info you need, it is a 119256CW, but should work. http://www.tasco.com/products/manuals/Tasco%20119256CW_TrailCam_1LIM_web.pdf

Hi!...

You can get the manual for this type of Tasco Trail Camera here:

Instruction Manuals Tasco Believe it

I hope this helps you!

I can't see why you'd need to, but it can't hurt. The settings on the camera will be preserved as long as the battery's are left in.

To reset the password:

Turn unit on and wait for password prompt
Depress the and hold the enter button until camera switches into 5-digit password mode _ _ _ _ _.

Trail sentry systems will not indicate 5-digit mode on the screen, but will indicate _ _ _ _ instead of HHHH .

Press enter to confirm 5 digit mode

Enter 5-digit code 66214 and press enter button( trail sentry cameras will accept a 5th Digit after the 4th digit is entered in the _ _ _ _ screen.

Camera will now go into operating mode, and user can now program a new password from the setup mode.

Follow this link to see the user manual PDF:

http://www.bushnell.com/manuals/trail-scout/119000TrailSentry_manual.pdf

You can download the manual from the manufacturer's web site at
http://www.tasco.com/products/manuals/Tasco%20119215C%20TrailCam_2LIM_web.pdf

I just bought,last August, a Tasco Digital Trail Camera - 119223C . Took pictures until Jaunary 2011, my camera display shows Loc and the SD Card flashes. The instruction manual does not reference this setup code. Does anyone know what 'Loc' means? I tried to reformat card, I also so not get a Y/N option for formatting. I bought a new card and changed batteries. no change!

Okay, I spent a lot of time refusing to accept that I couldn't get my tasco trail cam to work with my computer. I did figure it out though, to my relief. Tasco's directions are a little vague, but here it is: turn camera on, don't connect it to usb port, yet. After it turns on, push menu button, now connect it to your usb port. Disregard when it asks about installing driver software. If you follow these steps your computer will recognize it as another drive and ask open folder to view files,etc.

http://www.tasco.com/products/manuals/Tasco%20119223C_1LIM_web_rev5.pdf

I get an error message when I try to enter password on a tasco digital trail camera how do I get a new password/

To reset the password:

Turn unit on and wait for password prompt
Depress the and hold the enter button until camera switches into 5-digit password mode _ _ _ _ _.

Trail sentry systems will not indicate 5-digit mode on the screen, but will indicate _ _ _ _ instead of HHHH .

Press enter to confirm 5 digit mode

Enter 5-digit code 66214 and press enter button( trail sentry cameras will accept a 5th Digit after the 4th digit is entered in the _ _ _ _ screen.

Camera will now go into operating mode, and user can now program a new password from the setup mode.

Follow this link to see the user manual PDF:

http://www.bushnell.com/manuals/trail-scout/119000TrailSentry_manual.pdf