Question about Dishwashers
Display shows an error code. Do the following:
1. Unplug washer or disconnect power for one minute.
2. Plug in washer or reconnect power.
3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, call for service.
Posted on May 27, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 22, 2014 | Asko D1976 Built-in Dishwasher
F2 error in your Asko dishwasher indicates that the water is not draining or is unable to drain and dishwasher not draining issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. First make sure that the drain is not clogged and remove clogs if present. If no visible lint is present then remove the lower front access panel to check the drain filter and drain pump for any clogs, you'll need to clean the drain filter and drain pump completely. Also, check for any food pieces stuck near the pump impeller & clean the chopper assembly. Please note that dishwashers don't drain out the complete water such that heating element doesn't overheat. Hope this helps... Please post back for any further assistance.
Aug 02, 2011 | Asko D1706 Built-in Dishwasher
Jun 08, 2011 | Asko D1976 Built-in Dishwasher
Apr 22, 2011 | Asko D1976CSTM Built-in Dishwasher
Dec 23, 2010 | Asko Dishwashers
Jun 26, 2010 | Dishwashers
Oct 05, 2017 | Asko D1976 Built-in Dishwasher
Jan 19, 2010 | Asko D1976 Built-in Dishwasher
454 people viewed this question
Usually answered in minutes!