Error 70 - Canon EOS 5D Mark II Digital Camera with 24-105mm lens

http://printcopy.info/?l=en&mod=erc&brand=Sharp&model=AR5623N&code=F2%2070

Sharp AR5623N Error Codes

Sharp AR5623N Error Codes Code: All codes CH Blink CH ON E7 01 E7 02 E7 06 E7 10 E7 11 E7 16 F2 40 F2 64 F2 70 F2 74 H3 00 H3 01 H4 00 H5 01 L1 00 L3 00 L4 01 L4 31 L4 32 L6 10 U2 04 U2 11 U2 12

Code

F2 70

Description

•Improper cartridge (Destination error, life cycle error) •Identific t ion error •Model error •Type error •Destination error •Data abnormality •Misc error Detail •The destination of the machine differs from that of the CRUM. •The trade mark code of the CRUM differs. •The company code of the CRUM differs. •The boot program model code does not coincide with the CRUM model code. •When the CRUM type is other than genuine/ conversion/production rotation. •The machine destination differs from the CRUM destination.

Causes

CRUM chip defect Improper toner cartridge.

Remedy

Replace the toner cartridge.

What does the trouble code 70 h95 mean - Fixya

www.fixya.com/support/t25932829-trouble_code_70_h95_mean

28 mins ago - what does the trouble code 70 h95 mean - Bowflex Treadmills question.

What Does Your Treadmill's Error Code Mean? - LifeSpan

www.lifespanfitness.com/.../what-does-your-treadmills-error-code-mean

Free
May 21, 2015 - Please refer to the following table if your LifeSpan treadmill is displaying an error code. If after trying the suggested solutions your treadmill is .

I took successive shots then I encountered "Error 70". What I did was remove the mmc and the battery and let the camera cool off for 10 minutes. It worked...although I what I want is to really eradicate that Error 70 problem.

Error 01 means that communication between camera and lens is faulty. Try to clean lens contacts.

restart the print spooler services from the computer services.

If the macro switch is held on the lens by 2 screws it is to old and will on work on your camera but if yous is a super type it may need a rechip

dvd not run and show c 13 70

Hi,
Can you verify the error message to be 70? Error Codes for the 4100 starts at 71 as shown in the link below.
http://tinyurl.com/yvcv35

It could be error 7D. You may try to remove the toner cartridge from the printer and slide the corona wire cleaner and put it back on. Do this with your fingers crossed. :-)
Error messages like these are not user serviceable. Another bet is to unplug the unit, wait a couple of minutes and plug it back again. If the error persists, professional service is required.

Best Regards

this is servo IC problem.