I had this problem on the weekend! I fixed it with a more archaic method. When it says turn the camera off and then on again, the lens is stuck out. It only goes back in when I turned the camera off and then on for a brief second, and then pops out again. I held the lens in with my fingers when I turned it back on. The camera tries to open the lens 3 times and then gives up. I then turned the camera off whilst the lens was closed. Left it for a few seconds and turned it back on. Voila!!!
If the message persists, take the camera to the nearest sevice center.
952 views
Usually answered in minutes!
displays turn off and on again
continually shows turn camera off and on again
When turning of the camera the lens does not draw in. When turning it on, the lens draws in and out again, afterwords the message appears: turn camera off and then on again
Same problem, lens makes some strange clicking noise when coming out, then displays shut off and on again, doesn't go back in when i turn it of. Goes in and comes out and displays message again when turned on.
×