Question about Kenmore 55612 / 55614 / 5561 / 655619 Side by Side Refrigerator

Open Question

I have a kenmore coldspot s/s 106.57032602 that i changed the filter in and the filter light didn't come back on.The despencer still works and the water after a few days doesn't come out cold. I've unplugged the ref. for a few mins and replugged it in to see if would reset, but no dice. any suggestions

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Water filter stuck on my Kenmore Fridge

I had the same problem. I coudn't get the knob to turn. I ended up taking the front grill off so I could get a better grip on the knob. Once I did that I still have to put a lot of pressure on the knob to turn it but that did the trick. When I got it turned a quarter turn then it was easy to pull the filter out. Hope this helps!

Posted on Jan 11, 2009

Ad
peyton32034

peyton thompson

  • 410 Answers

SOURCE: kenmore elite coldspot 106.55606400 --fridge not cold enough --

37 is the atual temperature that your trying to acheive. so to make it colder you would go down to 36 which is one degree cooler. hope that helps. thx peyton

Posted on Jan 31, 2009

Sea Breeze

John Tripp

  • 4656 Answers

SOURCE: Kenmore Coldspot 106.9552610 not cold enough

Inside the fresh food compartment look for an opening that will allow you to turn the defrost timer clockwise slowly. When you hear it click the refrigerator should go into defrost. If the timer is bad it will need replaced. Let me know. Below is a photo of timer.
Part number 6

6cf617d.gif77c4cd2.png

Posted on Feb 27, 2009

Ajith Kumar

  • 190 Answers

SOURCE: kenmore coldspot top freezer auto ice maker, water

Dear customer,

               We suggest u to perform the following checks to solve ur problem...

  1. Check the refrigerator for level
  2. Check the ice maker for level
  3. Inspect the fill cup alignment
  4. Inspect the water supply line
  5. Test the water inlet switch
  6. Test the water inlet valve
  7. Check the shutoff arm
  8. Test the shutoff switch
thank you.. 

Posted on Apr 08, 2009

rogrrabbit

Roger Campbell

  • 986 Answers

SOURCE: Oue Kenmore Coldspot ice-maker quit working. Any

Wake up one morning and Boom no ice left in the bin. What happened and What can I do to fix it without calling someone? Some ice makers will get a piece of ice in the wrong place and jam the extraction. Get a hair dryer and heat up the ice maker to release the fouled ice cube and that baby will start going. No water in ice mold?Do this easy test: pour some water in the ice maker mold and wait. If it kicks out a batch, but it has no water in it, most likely the water valve is bad. water%20valve%20for%20water%20and%20ice%20through%20the%20door.jpg Watervalve for SxS box Since it is the cheapest part and you can do it yourself replace it. If it turns out you need a new ice maker then you have a new water valve already to go with it. What if the ice maker has ice in it but won't harvest any? One cheap and easy item for the do it yourselfer to replace is the ice mold thermostat. Check for voltage between T and H if you have 120 volts then the bi-metal (inside that ice mold thermostat) is bad. If it's good you will have 0 volts. ice%20mold%20thermostat%28modular%29.jpg Ice mold thermostat Located in the plastic housing and seated against the ice mold is that thermostat. This looks intimidating but is easily fixed by anybody who could change a spark plug. There is no wiring. One more thing to look for: You can put a jumper between L and V and this will activate the watervalve. Have rags ready! If you are a cheapskate and want to be frugal and not buy a new ice maker or a new head(brain) head1.jpg modular crescent ice maker you may want to remove the main gear and clean the copper plate behind it. That plate gets dirty and won't allow for a good contact with the water valve connection and does not power up the valve...Shhh! They will all be doing it! Modular crescent Icemaker test points: With NO power to the icemaker, and ice ejection fingers in the freeze position: Your ohm meter should read 8800 ohms between L and M, and 72 ohms between L and H. With power ON to the ice maker: If meter reads 0 volts between L and N you have no power to the ice maker. If the meter reads 120 volts then you have power to the ice maker. If you have 0 volts between L and H heater is off if you have 120 between L and H the heater should be ON. If you have 0 power between L and M the motor is off. If you have 120 between L and M then the motor should be ON. If you have 0 volts between T and H the thermostat is closed If the meter reads 120 between T and H then the thermostat is OPEN. If the voltage is 0 between N and V the water valve is closed. If the meter reads 120 water should be filling the mold.

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore coldspot model 9552822 bad taste from the water and ice maker


When did you last change the carbon filter? When did you last clean the icemaker? They get a colony build up that is like jelly made from bacteria.

If you changed the filter within 6 months, contact your water utility and ask them to test the water.

May 07, 2018 | Kenmore Refrigerators

1 Answer

Where is the water filter on kenmore coldspot 106.9505712


On the front bottom of your unit you have a grill. On the grill there is a round knob. Turn the knob 1/4 turn counter clockwise and pull the filter out. Note the slot on the back of the knob that holds the old filter. Slide the old filter out of the slot and replace with the new filter.
Reinsert the filter with the knob into the filter housing. Turn the knob 1/4 turn clockwise to lock it in.
Now, the new filter has air in it. At your water dispenser, fill cups with water. There will be a lot of air and water coming out. Continue this until all of the air is out of the filter and there is just water fill.
When to change your water filter - Your unit has a water filter change light. This light is not tied into water pressure. It is like a egg timer. Every 6 months it will light. This does not mean you need to change your water filter. Change your water filter when your ice cubes start to get small or the water coming out of your dispenser is of a low flow. Depending on your family size, you may not need to change your water filter for several years.
My name is Peter. I am a retired Sears Home Services refrigeration technician.

Oct 24, 2014 | Kenmore Refrigerators

1 Answer

I have a Kenmore Coldspot Side by side refrigerator model 58787892. The ice maker is not making ice. The mechanics of the maker work but it does not fill up with water. The filter is changed regularly...


check to see if the ice tube going into the ice maker is frozen up. you may have to thaw it out to get water to reach the ice maker again. lmk if that's not it

Aug 05, 2013 | Refrigerators

1 Answer

Kenmore Coldspot Model 51572200 is leaking water all over the floor


On the bottom rear of the refrigerator as you are looking at it from behind the left side where the water is feeding into there should be a double valve. 1 is for the water and the other to the icemaker. Many times that valve won't shut off, however the switch that dispenses the water is evidentially bad and needs to be checked if it is stuck open.

Jun 03, 2017 | Kenmore Side by Side Refrigerator

2 Answers

I have a leak inside my Kenmore Coldspot Model # 106 72104100. It is not coming from the icemaker.


If the water filter is old the seals will leak into the evaporative tray overflowing it. Replace the filter or give it a turn to bypass.

Jan 26, 2011 | Kenmore Refrigerators

1 Answer

I have a problem with my kenmore elite which is made by lg. the water on the despencer will stop producing water. i have to take filter out and shake water out and then i put it back. about l hour later it...


If you have changed the filters, check and make sure the line is clear coming from water supply, and you have plenty of pressure from the valve that feeds the water dis, usually it lies in the water pressure, the valve or the filters

Feb 06, 2010 | GE GSH25JFR Side by Side Refrigerator

2 Answers

What is the part number for the water filter for a Kenmore Coldspot refrigerator model 106.54209300?


The part number is 4392922 for the water filter. You can purchase this water filter at the below link for $ 34.49

http://www.freshwatersystems.com/p-3051-whirlpool-kitchenaid-deluxe-filter-4396510.aspx

FreshWaterSystems
1.877.335.3339
http://www.freshwatersystems.com

May 17, 2009 | Refrigerators

2 Answers

How often do I change the water filter


i cant even find a filter on your machine, if there is one, there will be a model number on the filter itself as well as re-order information.Once a yr , you shhould change

Dec 07, 2008 | Refrigerators

Not finding what you are looking for?
Kenmore 55612 / 55614 / 5561 / 655619 Side by Side Refrigerator Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

Jimmy

Level 2 Expert

61 Answers

geob91

Level 2 Expert

128 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...