OFF indicates that the Temperature Control is switched Off.
Pressing the Up or Down Buttons should change the display back to the Temperature Display and allow you to set the required Temperature.
It sounds like its been switched into what they call Sabbath Mode which turns everything off but the compressor. Try pressing and holding the Control Lock & Temp Display buttons together for 3 seconds.
OK, So the control are as shown in the User & Care Guide and not the Electronics Control Guide, but from the Electronics Control Guide is states. -
So although your controls are those shown in the User & Care Guide, in the Electronics Control Guide it states. - You may also turn off the freezer by pressing the UP arrow
button until the display reads "10". With the display at "10', press the Up Arrow button two more times within two seconds. The display will read "OF". The freezer can be turned ON by pressing the DOWN arrow button, with the display -10, two times within two seconds. Continue by setting the control to the desired temperature.
×
That means that the frezer is off. You need to set the frezer on a temp to turn on. You can get the manualon the link below.
http://www.managemylife.com/mmh/lis_pdf/OWNM/L0603500.pdf
3,823 views
Usually answered in minutes!
I did download the manual, however I have the Deluxe Electronic Temperature Control; and it states to refer to the electronics Control Guide supplied, which I cannot find online.
I have tried this, but nothing changes. I have also unplugged the machine and pushed all of the buttons, and nothing happens.
The only buttons on the freezer are Quick Freeze, up and down arrows, and Reset/Alarm buttons.
THANK YOU!!! It worked!
×