Oki is forcing you to buy a new fuser. If fuser roller, film and thremistors are still in perfect shape, reset is possible with new OEM FB fuse
1. Turn machine on while pushing and holding the TWO up/down menu
buttons at same time.
2. Menu window will show "OKI USER"
3.
Scroll to " Engine Dialog Mode" is indicated. Push Enter button.
4.
"Diagnostic Mode xx.xx.xx S-Mode is indicated.
5. Scroll to "NV-Ram
initial" is indicated. Push ENTER.
6. Window shows "NV-Ram- Initial
Table 1".
7. Push ONLINE and ENTER Buttons simultaneously and HOLD
for 10 seconds after you see "Executing Reset" appear in menu window.
8.
Restart printer.
if this is the case it is a faulty toner and you cannot get on without replacing it
×
17,378 views
Usually answered in minutes!
I only got some adhesive paper wrapped around roller it is all off didn't even get any residual adhesive left stuck on the roller can I over ride the fatal error code I don't believe anything is damaged
Hi The LED screen seems to be stuck on SYSTEM MAINTE when I power up with both + and - Menu buttons together what should I do
Can you help with the "system mainte" when I push + and - when I power up? I really need to get on with my printing if not I'll have to look else where for help
Thanks
Ngarita
×