I have a pair of LL Bean Red Desk Thermo Clock Model 0GMR7, and misplaced the owner's manual. Had to change the batteries and reset the time and temperature displays. I was able to reset the temperature display, but cannot reset the time display. I can not find a replacement owners manual. Can you tell me where I can get a copy of the manual? Brad

Hello
I've the user manual to your Sony AM/FM clock radio. There are so many model numbers to these devcies. If you give me the exact model number [not the serial number], I'll search in my system library for that manual. If has,, if you send your email address to me by Fixya comment box, I'll send a copy of it to you, if I have it.
If you need only a manual to sony AM/FM clock radio, send your email address to me now. I'll send you one[ user manual for SONY ICF-707 AM/FM clock radio. OK

HOW TO SET TIME
1. Press [MODE] button for two seconds while in normal mode.
2. The digits and colon will blink which indicates the time setting mode has been enabled.
3. Momentarily press the mode button until the date or time digit you wish to set is blinking and use the up or down arrow buttons on the back to set the correct time and date.

This may be helpful, it's how I set mine.
1) Remove battery cover
2) Remove batteries
3) "Set" the clock and battery cover into the trash can.

There you go. No more problem !

Try removing the battery and unplugging it form the wall for a few hours. This will allow the microprocessor time to discharge and reset to it normal functions. After letting the Clock/Radio discharge, you can put the battery back in the Clock/Radio and see if it has reset itself to the factory setting.Then use the link (http://www.emersonradio.com/owners) copy the web page link and paste it into the address bar of you browser. It will take you to Emerson home page for owners manuals. There you can find your model clock radio and follow the instructions for resetting the clock radios functions. I hope this information helps you with your problem.

You can try to take the battery out of the clock/radio and disconnect the plug. This will allow the microprocessor to lose power and reset itself to the factory set-up. It will take about a hour to make sure its discharged. Then put the battery back in the clock/radio and see if the functions return to normal. You can go to this web link.(http://www.emersonradio.com/owners) copy and paste this web link into the address bar of the browser and it will take you to the Emerson website with all the owners manuals listed by make and model. You can find you make and model clock/radio and follow the instructions for resetting the functions. I hope this information helps you with your problem.

[http://www.emersonradio.com/owners/SmartSet%20Series/] copy this web link and paste it into the address bar of your web browser. It will take you to the Emerson customer web page for the pdf copies of the SmartSet Clock/Radios. You will need a pdf reader and writer to read and make a copy of the owners manual for yourself.Find the make and model number of your Clock/Radio. The instructions for resetting the time after changing the battery will be in the manual. I hope this information helps you with your problem. Than you for using FixYa and have a nice day.

I've had a similar problem with another model, an Oregon Scientific Model IWA-80055 Wireless Thermo Clock, in which when I replaced the batteries in the remote sensor, the clock would not read the temperature from the remote sensor.
I found it fairly consistent to solve this by taking a battery out of place in the clock and putting it back in.  Unfortunately this also messed up the clock's time and date.  This is also in the instructions catalogue for the device, check and see if yours gives a similar solution.

Hi faulkquarter

I take it that the clock displayed with this problem if not a 22717 model. The one I have sighted is a digital clock. Generally, you need to hold down the "time" button and also press the "hours" and "mins" buttons at the same time to set the time. If this is not how your clock appears, please give me the button names and I can write a method of changing the time for you.

regards
Graeme

For the Sharp SPC374T Atomic Clock - Time Zone setting- Press the 'Time' button once, the time zone will show where 'Day' usually is, use the Up or Down buttong to adjust.

For the outdoor Thermo, credit to my neighbor for this one. Remove battery from main unit, wait 2-3 minutes. Reload batteries. Once you get a reading from the outdoor sensor, hit the reset on the main unit. You will have to reset the time zone as described above, but this worked for me after 10 months of no outside temp showing up!

Good luck,
Doc