Dynex DX-L32-10A 32" LCD HDTV Logo
Anonymous Posted on Jul 03, 2011

Cannot get full screen picture - Dynex DX-L32-10A 32" LCD HDTV

1 Answer

jheremiel

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 14 Answers
  • Posted on Jul 03, 2011
jheremiel
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: May 22, 2011
Answers
14
Questions
0
Helped
11011
Points
36

Full screen resolution depends on the source signal that you feed to your LCD TV. Most often, the signal come in 16:9 screen size, which sometimes show big black portion on both top and bottom of screen. To maximizes screen display, you can adjust the screen size of your LCD TV through remote control, this features are available in most LCD TV. you will have the option to choose Full Screen Mode, 16:9 screen resolution or many others to choose from (most case about 3 to 4 screen size.

  • 1 more comment 
  • Anonymous Jul 03, 2011

    thank you -we have tried to find this on the setup mode with no luck

  • jheremiel Jul 03, 2011

    Hi, To make sure i'm providing right reply, can i know exactly what can you see on the screen.
    what are the source signal, is it DVD, bluray or TV channels?

  • Anonymous Jul 03, 2011

    parents new tv on cable - all setup went ok - but cannot find on the remoye
    how to change screen size

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Change TV resolutions to view slide shows

Nope. The picture resolution has to be 1080 to fill the screen completely. Using stretch and zoom will distort the low rez pictures. No option to change resolution on the TV itself.
0helpful
1answer

My screen's camera says, "Card is Full."

in camera memory is alredy full but u say only memory card formaat pls look the camera memory and no answer that the card is full
2helpful
1answer

Picture does not fill the whole screen

Check its picture aspect ratio settings.
0helpful
1answer

My picture is not full screen. What do I do to get it back to full screen?

16X9 is full screen on HD sets--usually determined by either the settings or a box if one is used---some older sets HD only have 4X3 which is not full screen.

If the signal is component or HDMI from a box= it determines what picture size may or may not be set to.
0helpful
1answer

Cannot change the picture back to full screen. remote control want return the picture to full screen with the

Hi, Turn your TV on, select the menu and see if there is something in picture settings (wide screen or full screen) Try to connect a DVD player using HDMI cable. See if there is any difference.
Some DVD players will also have screen sizing. If nothing helps contact TV repair. Good luck
0helpful
1answer

Screen savers

Go to Control Panel choose Display Properties go to Desktop tab there is a selection from Position: center, stretch, tile choose the stretch then apply and ok, your picture will displayed in full screen in your desktop
0helpful
1answer

Full screen view

in order to get the full HD experience you should be using HDMI cables. if you're using the white/red/yellow cables then your HD channels will not broadcast in full HD and you'll be stuck with the annoying black things around your screen
0helpful
1answer

Screen shows full memory card

It's quite possible that it's actually taking photos and storing them to the camera's onboard memory and not the memory card, explaining why it gets full so quickly with two pictures and why you can only delete two pictures. Look for a setting to change the storage to the memory card.
0helpful
1answer

Can't see full picture on TV

sounds like the dvd players set for differant picture format like full screen compared to wide screen settings. Look in the Menu of the tv as well as the dvd player
Not finding what you are looking for?

1,378 views

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

Cindy Wells

Level 3 Expert

6687 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Jesse Walters
Jesse Walters

Level 2 Expert

337 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...