At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
When you turn it on it clicks off and on and then will catch and then shut off and then if you are lucky after about ten miniute of going off and on it will stay on. when you shut it off again and try and turn it on does the same thing. now will not catch and come on just clicks off on off on. this off on is when you click it to turn it on and do not touch the remote again. it has been clicking on off by itself for over an hour, help thanks
Re: When you turn it on it clicks off and on and then...
Most likely bad capacitors in the power supply. Contact Samsung customer support as they are offering a one-time courtesy repair on many of these models.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sound like your lamp is bad ...Panasonic TY-LA1000 Lamp Replacement...Ballast Repair Kit for Panasonic PT-50LC13 some time the ballast go bad as well to hear bouth part number one lamp and 2 ballast I hope this help you..
lot of times you can disconect the battery cables + and- and take a clamp and clamp the two cables together for ten miniutes the reconnect this is a factory reset that normally turns the light off the other way is if you have a scan tool compatible with the car to clear the codes
The security system is keeping the engine from starting. In order to manually learn the security, you should try the following. With a fully charged battery, and all accesories, including headlamps, and dome lamp off, turn the key on, crank the engine for a second, then release the key. Leaving the ignition on for ten miniutes, the security light will shut off. turn the key off, back on, then repeat. This needs to be done 3 times, after 30 mins, try starting the engine. It should have relearned, and start up. Good luck...coop
Most likely you either have a door latch going bad that is letting the door pop open slightly when the clothes hit it or the door switch is going bad (or the wire is falling off of it) Good luck
the process takes about thirty minutes. in three ten minute key cycles. here is how you do it . make sure that the battery is fully charged. step on parking brake pedal and leave it down this will keep the head lights off. turn the key and try to start it then leave it in the on position. you have to leave the key in the on position for ten minutes. you will see the security light on. after the ten minutes the light will go off then turn the key to the start position. turn the key all the way back to the off position and count to three. then try to start it and leave the key in the on position for another ten minutes till the security light goes out. you have to do this same process three times to reset the security system. sometimes you get lucky and it will start after the first ten minute cycle.
New door sensor im afraid,unless the machine senses that the door is properly shut none of your wash or spin cycles will start.Sensor located inside washer casing , where lock pin on door handle enters machine.It may just be loose,try tightening the two screws either side of lock keep.If it needs replacing you will need to UNPLUG washer ,remove lid and slide your arm down inside front of washer to access.Good luck.
×