When printing a powerpoint presentation to a lexmark E260, it takes a lot of time to print it. It prints one page, wait for some minutes & then print second page and so on.

Go to any website that sells bulk ink and toner refills. They have chip resetters. You need to do this every time you refill . It cannot be bypassed.

The device statistics is found under 'Utilities' in 'Print stats'.

Hi there maximum time we found it is a the head problem. The print head is what the cartridges sit in inside of the printer. For resolve the problem please follow these.
Open the printer and wait for the carriage to slide over. Some how if its not come then Unplug the printer & Manually slide the carriage. Now Remove the ink cartridges from the print head & Use wet warm cotton swab or use alcohol to thoroughly clean the print head. Repeat this until there is no ink residue coming off on the cotton swab. After finished it make the head dry then fix it back. Now Try to print something now If that does not work then follow the next step.
Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer driver & restart the PC & Printer both again. Now install the driver of the printer and connect it with PC ,Turn on printer & go for a test print from the printer preference. Thanks & waiting for your reply.

Please try to use a Host-Based print driver, you may download this from support.lexmark.com and installed it on your computer.

For further assistance, please contact Lexmark Technical Support

arstechnica.com/civis/viewtopic.php?f=19&t=405258

You need to clean the cartridges and the print head. Remove the cartridges and clean the nozzles with a damp cloth, let it dry for a few minutes and then insert them back and now try to print a few pages, it should take about 5 - 6 prints before printing properly.

Could be software. I have seen the last several Adobe latest version documents take several seconds to print. I have also seen increased print times with MS office 2003 Powerpoint documents.If it is a single page MS Word or Excel document and u are printing several copies of it, you should turn off the collate feature for printing of that document

1. Remove print jobs at your computer if present
   
2. Turn off printer
3. Disconnect printer power supply
4. Wait 30 seconds
5. Reconnect printer power supply
6. Turn on printer
   

There should be a setting in the 2-sided properties for binding orientation.

For a MAC, do this:

On the File menu, click Print.
Open the Two-Sided Printing panel.
Select the option to print on both sides.
Select the binding orientation by clicking the appropriate icon.
Change any other settings, and then click Print.

do a nozzle check, or printer utility check on the printer and see if this helps.