There is a massage displaying error code 5B00 and sometimes ink absober is full , my printer is canon pixma ip 6700 d . How can I reset tha pro

Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on.

1. Make sure the printer is turned off.
2. Press and hold the Resume button (triangle inside a circle).
3. Whilst it is held down, hold down the Power button. ...
4. Keep the Power button held down. ...
5. Release the Power button.

More items...

Reset Canon Printer ink absorber ' Fix-KB

www.fixkb.com/2011/06/reset-canon-printer-ink-absorber.html canon ip7240 is saying ink absober full how can reset it Google Search
see if this helps you out.

Canon PIXMA MP180 All-In-One InkJet Printer
Error 5B00

Ruwanye

I believe the waste ink counter is full so you need to reset it:
http://fix-your-printer.blogspot.com/2010/11/error-code-5b00-on-canon-ip2700-printer.html

Good Luck

The waste ink absorber is full and is triggering error 5B00. To reset the error you need to replace the ink absorber. You may find a cheaper ink absorber kit on Ebay or Amazon.

Need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2
After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.

Hope this guide can help fix your problems

Extra download
Fixwasteinkabsoberflowip1000

Need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2
After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.

Extra download
Fixwasteinkoverflowip1000

This problem is between waste ink absober full and ink cartridge.
Firstly your need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2

After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press that door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.
----------------------------------------------------------------------------
IF after reset your waste ink absober full, problems still apppear error5100
> change your ink cartridge with the working cartridge

usually error e5100 due tow problems above

Hope this guide can help fix your problems

Extra download
Fixwasteinkabsoberflow

you need to replace the absorber waste ink pad and service the printer

Hi,
That error code is described below:

Error Code Error indication Error condition.
5B00 Waste ink full H/W fail Replace printer.

And i would like you to refer to www.feedroller.com/Store/Service%20Manual/S100sm.pdf
Thos document has all the error codes and what needs to be done for that.

Hope my info is useful,
Thanx for using fixya.