Hello, my first problem is finding the model number for my small (condo size) Frigidaire top load washer with stacked front load dryer. It's in a tight space and model is not visible from the front so I'm guessing I'll need to unplug the unit a look in the back somewhere? I might be able to squeeze behind there, but it would help if I knew where to look.

https://www.appliancepartspros.com/search.aspx?model=met1041zas2

Hello Friend, that's a great question!

In order to provide you the correct instructions on how to attach the hoses on your Frigidaire washer, I would need your model number please. You can normally locate your serial tag (which lists your model number) on the upper front interior of the door frame on afront load washer. If you own a top load washer you would normally find the serial tag on the inside of the lid, on the right side. Thank you and I look forward to your response. - Z

Hello Friend, that's a great question!

In order to provide you the correct drum size of your Frigidaire washer, I would need your model number please. You can normally locate the serial tag (which lists your model number) on the upper front as you open the door if you have a front load washer. If you own a top load washer, you may find the serial tag inside the lid, on the right side. Thank you and I look forward to your response.

Hello - Try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and start normal cycle. If this proves to be ineffective, then contact a professional to move forward accurately. Possible causes could be a faulty power cord or house wiring, defective control board, thermal limiter or door switch.

The 'E' in the model number indicates it should be an electric dryer.

Hello the advice about removing the top of the washer and bolting the dryer to it is exactly what to do.Under the washer top is built in brackets to do that.Every front load Frigidiare washer leave the factory pre-equipped to stack the dryer to it by removing the top and bolting the dryer to it

available through sears but the part number is
134503900

16.00 dollars

I had the same problem and the buzzer was one of the worst sounds ive heard. But, I found the buzzer and turned it off for good. Open the front panel and look for a small part in between the 2 main curcuit boxes.I have a Fridgidare stackable combo FLEB8200FSO. On mine this small part is number 144547100. Look for two black wires, one goes to H and the other to C. Disconnect both wires and no more buzzer!! Good Luck

ckd dryer door and door frame

measure your dryer carefully and check with the dealer where you wish to purchase a machine, regarding
the stacking kit. It may work. They are general standard sized. Don't ry to gerry rig anything or you may have big problems. In your case I recommend using a well known SMALL appliance store that does theri own installations, so they will bring what they may need, but if yours works, they can still use it.Good Luck