Question about Televison & Video

1 Answer

Hi, My Samsung DVD player remote would not respond when power button pushed on. When DVD power turned on Manually and DVD loaded the remote would not respond to the play, arrow buttons eirther?? My LG DVD/COMBO did respond with power button on and off but would not respond to play, arrow buttons etc.,? Any suggestions?? Regards Jackie

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

If the buttons on the case are working but the buttons on the remote don't then it's clearly a fault with the remote.
Each button in the remote is made out of 2 wires on the electronics board that are joined by a small patch of conductive paint situated on the rear of the rubber button. If something gets in there, like water or dirt or the patch flakes out, the contact is no longer made and the button no longer works. The remote will have to be dismantled by popping the clips on the periphery with a sharp tool, the rubber strip holding the buttons will have to be washed and the board wiped clean. If the buttons still don't work after that then the remote is dead, you will have to get another one.

Posted on Jul 24, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dvd stuck in Samsung bluray


Have you tried pulling the plug for a minute? Also try the eject button directly from standby.

Nov 26, 2013 | Samsung BD-F5100 - Blu-ray disc player

1 Answer

How to reprogram a universal remote control?


http://www.youtube.com/watch?v=fXDdeXmJjfM

http://www.remotecentral.com/features/remotes.htm

Instructions
    • 1 Find the brand of the universal remote you own on Internet sites like Remote.com (see Resources below).
    • 2 Click on your universal remote brand on the website to find the code list for that remote.
    • 3 Check to see if your remote is preprogrammed to operate your TV, VCR, or Cable Box using the following codes: TV - 000, VCR - 000, Cable Box - 000, AUX - use VCR code 037.
    • 4 Manually turn on your device. Hold down the "Code Search" button on your remote, then press and release the device button you want to set up until it flashes.
    • 5 Push the power button repeatedly until the device turns off, then hit "Enter."
    • 6 Press any other button while the device is on to see if the device responds. If it does, you don't need to do any other programming. If it doesn't, repeat steps 4-6.

Read more: How to Reprogram a TV Remote ' eHow.com http://www.ehow.com/how_4454612_reprogram-tv-remote.html#ixzz1mji7B48P

Feb 17, 2012 | Sony DVD/VCR Combo Player

1 Answer

Unit model D-C350/XSA only opens region 4 need to also to open region 2 DVD's


Hi there,

When I was with Samsung NZ, the following was how we multizoned our DVD (Region 4) players:
1. Turn on your player, but ensure no disc in machine - screen should show "No Disc"
2. Turn on your TV and select your DVD input (as if you were to watch your DVD).

Using your factory supplied remote, press the following buttons:

3. Press the Repeat (or Repeat A-B) button
4. Press the following button sequence: 7, 6, 8, 8, 4, 9 (you should see the number '9' appear on screen - this means 'Region Free').
5. Press the Open/Close button (to open the tray)
6. Press the Open/Close button again (to close the tray)
7. Press Power OFF (to shut down your DVD player)
8. Press Power ON (to turn on your DVD player)
9. Insert Region 2 disc and wait (up to 1min) for firmware to respond and read your disc

If this fails, try procedure again, except for Step 4: change the last number (instead of 9) to '2'.


Let me know how you get on.

Cheers,

Scott



"If this has helped you, please be kind enough to leave a testimonial rating"



Jul 09, 2011 | Samsung DVD-C350 DVD Player

1 Answer

The player does not respond to commands from the remote. The sensor on the player does not light up when the remote's buttons are pressed. The light on the front of the remote does not go on when the...


Your remote may have gone bad. Using a digital camera there is a way of checking out a remote for proper operation. Google it and see what happens with fresh batteries.

Jul 23, 2017 | Koss KD260 DVD Player

1 Answer

Power light is yellow and won't respond


Return or take to a tv repair, most fix dvd players.

Dec 23, 2009 | Cyberhome CH-DVD 300 DVD Player

1 Answer

I am the owner of a DVD-SH871M/XEU, S/N: Y03B6SEQ600559N. I had an issue with the electronic program guide operating slowly, so after searching for product support on your website, I found a firmware...


Sorry, but this is something which only Samsung can now resolve.

Contact their customer care team directly, you'll need to make sure that you register the product online first to be able to benefit from their assistance.

Nov 06, 2009 | Televison & Video

1 Answer

SAMSUNG dvd


pushed info button on remote and held for 5 seconds. irritated it was so simple yet not listed any where on sites or manual.this was for samsung VR330 dvd player not tv.

Apr 10, 2008 | Insignia LCDTV26 26 in. Television

1 Answer

I need the code for a Samsung DVD-V9650 dvd player


There are two possible codes for this product.
1. Hold the remote away from the DirecTV box.
2. Slide the button on the top to AV 1 or AV 2.
3. Point away from DTV box.
4. Manually turn the DTV box off.
5. Hold down the select and mute buttons at the same time until the light blinks rapidly for a second.
6. Press in one of the following codes and press the power button. 7. If the DTV box turns off, press the select button. If not, repeat steps 5-7

Possible codes: 20573 or 20820

Dec 09, 2007 | Directv RC23 Remote Control

1 Answer

TV remote will not work properly


I have a Mitsubishi WD-52725 TV, too, and have experienced the same problems with it. My solution to the remote not responding is to push the reset button on the front of the TV (to the left of the Power button) with a paper clip and wait for the green light to stop blinking (about 1 minute). Then, turn it back on and try the remote again. Recently, my remote stopped responding when pushing certain buttons on it. I removed the batteries, and all of the little screws including the one inside the battery compartment and gently cleaned the contacts inside the remote and the circuit board with a cotton swab dipped in alcohol. After putting it back together, it works fine now.

Feb 28, 2007 | Mitsubishi WD-52725 52". Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...